Showing posts with label December 2012. Show all posts
Showing posts with label December 2012. Show all posts

Thursday, August 7, 2014

B.E. Electronics & Telecommunication, Wireless Networks (WN), Semester 8, December 2012.

B.E. Electronics & Telecommunication,

Wireless Networks (WN), Semester 8, December 2012.
Con. 10020-12
KR- 5094
(REVISED COURSE)

(3 Hours)
[Total Mark: 100]
N.B. (1) Question No 1 is compulsory.

(2) Attempt any four questions out of remaining six questions.

(3) Draw neat sketches wherever required.

(4) Assume suitable data if required.

1. (a) What is role of General Packet Radio Services (GPRS) in the GSM. ---- (5 Marks)

(b) Why is power control used in CDMA 2000 and WCDMA? ---- (5 Marks)

(c) Explain the security aspect of Bluetooth. ----- (5 Marks)

(d) Write various uses of Wireless Sensor Network. ---- (5 Marks)

2. (a) Explain UMTS network reference architecture in detail. ----- (10 Marks)

(b) Discuss QoS attributes used in UMTS. ----- (10 Marks)

3. (a) Discuss the forward and reverse link channels in CDMA 2000.----- (10 Marks)

(b) Explain evolution of IS – 95 in detail. --- (10 Marks)

4. (a) Explain Link budget analysis and requirements of wireless network. ---- (10 Marks)

(b) Draw and explain WAP programming model in detail. ---- (10 Marks)

5. (a) Define and explain different terms used in Bluetooth. ---- (10 Marks)

(b) Explain wireless sensor network protocol stack in detail. ----- (10 Marks)

6. (a) Compare all versions of IEEE 802.11 WLAN. ----- (10 Marks)

(b) Give the advantages, disadvantages and application of WAP. ---- (10 Marks)

7. (a) Compare CDMA 2000 and WCDMA. ----- (10 Marks)

(b) Write a short note on RFID. ---- (10 Marks)

Wednesday, August 6, 2014

DISCRETE TIME SIGNAL PROCESSING (DTSP) Semester 7 (3 Hours) December 2012

DISCRETE TIME SIGNAL PROCESSING
DISCRETE TIME SIGNAL PROCESSING (DTSP)
Semester 7
(3 Hours) December 2012
    KR-1068 
   [Total Marks : 100]
       
N.B. : (1) Question No. 1 is compulsory.  
  (2) Attempt any four questions out of remaining six questions.  
  (3) Assumptions made should be clearly stated.  
       
1. (a) Periodic analog signal will be always remain periodic when converted into digital signal. Is it true and false? Justify your answer. 05
  (b) Frequency domain representation of a periodic discrete time signal is a periodic. It is true or false? justify your answer. 05
  (c) Obtain the pole-zero plot of casual symmetrical linear phase FIR filter with odd number of coefficients, assuming smallest length, if it is known to have zeros at
z = j, z = 1, z = -1.
05
  (d) A high pass linear phase FIR filter has a magnitude response -
    | H(ejw) | = 4 sin(aw) - 3 sin(bw)
Find values of 'a' and 'b' assuming minimum value of N. Obtain corresponding impulse response.
05
       
2. (a) Classify the following (i.c. (A), (B) and (C) ) as --
  (i) Linear phase/Non-linear phase
  (ii) FIR/IIR
  (iii) All pass/high pass/low pass/band pass
  (iv) Stable/unstable --

           (A) H(ejw) = 3e-2jw
           (B) H(Z) = z + 0.6/z - 0.8
           (C) Given following pole-zero plot.

12
  (b) Determine the zeros of the following FIR system and indicate whether the system is minimum phase, maximum phase or mixed phase.

  (i) H(z) = 6 + z-1 + z2
  (ii) H(z) = 1  z1 + 6z-2
  (iii) H(z) = 1 - 5/2z-1 - 3/2z-2
  (iv) H(z) = 1 - 5/6z-1 - 1/3z-2

08
       
3. (a) Design a casual digital high pass filter using windowing technique to meet the following specifications :-
 
Passband edge (ΩP) : 9.5 kHz
Stoband edge : 2 kHz
Stopband attenuation : > 40 dB
Sampling frequency : 25 kHz
10
  (b) Obtain the analog transfer function of a Butterworth low-pass filter with following specifications :-
 
Passband edge (ΩP) = 250 rad/sec.
Passband attenuation < 0.1 dB
Stopband edge (ΩS) = 2000 rad/sec.
Stopband attenuation < 60 dB
10
       
4. (a)   (i) If x(n) = { 1 + 2j, 3 + 4j, 5 + 6j, 7 + 8j}. Find DFT X(k) using DIFFFT.
  (ii) Using the result obtained in (i) above not otherwise, find DFT of following
       sequence :-
          X1(n) = { 1, 3, 5, 7 } and
          X1(n) = { 2, 4, 6, 8 }
10
  (b) Obtain direct from I, direct form II realization to second order filter given by --
     y(n) = 2 b cos(w0) y(n-1) - b2 y(n-2) + x(n) - b cos(w0) x(n-1)
10
     
5. (a) Using linear convolution find y(n) for the sequence -
     x(n) = { 1, 2, -1, 2, 3, -2, -3, -1, 1, 2, -1} and h(n) = {1, 2}
Compare the result by solving the problem using overlop and add method.
10
  (b) Find the response of the difference equation given by -
   y(n) = 5y(n-1) -6y(n-z) +-X(n) for x(n) = u(n).
10
       
6. (a) Explain up-sampling by an integer factor with neat diagram and waveforms. 10
  (b) Why is the direct form FIR structure for the multirate system inefficient ?
Explain with neat diagram. how this inefficiency is overcome in implementing a decimator and an interpolator.
10
       
7. Write notes on any four of the following :- 20
  (a) Frequency sampling realization of FIR filters  
  (b) Goertzel algorithm  
  (c) Set-top box for digital TV reception  
  (d) Adaptive echo-cancellation  
  (e) Comparison of FIR and IIR filters.  

Tuesday, August 5, 2014

OPTICAL FIBRE COMMUNICATION (OFC) DECEMBER 2012 ELECTRONICS AND TELECOMMUNICATION SEMESTER 8

OPTICAL FIBRE COMMUNICATION (OFC) DECEMBER 2012 ELECTRONICS AND TELECOMMUNICATION SEMESTER 8

                                                (REVISED COURSE)                                            KR-4695
                                                         (3 Hours)                                            [Total Marks : 100]
N. B. : (1) Question No. 1 is Compulsory.
          (2) Attempt any four questions out of remaining six questions.
         (3) Figure to the right indicate full marks.

1. (a)What are the advantages of optical fiber Communication ?20
    (b)Explain Badwidth distance product.
    (c)What are Linearly Polarized modes ?
    (d)Compare direct band and indirect band semi conductors.

2. (a)

Derive the expression for Numerical Aperture of a step -index fiber. What will

10
happen to N. A, If Cladding is removed ?
    (b)Compare step index and graded index fiber.10

3. (a)

Starting from Maxwell's equation, derive the wave equation for step index fiber.

10
    (b)Explain the signifiance of V-number. Derive the expression for number of guided10
modes in graded index fiber.

4. (a)

What do you understand by intramodal dispersion ? Derive the expression for

10
material dispersion.
    (b)What are the reasons for signal attenuation in a optical fiber ?10

5. (a)

Give the structure of a surface emitting LED. Compare with an edge

10
emitting LED.
    (b)Explain Avalanche Photodiode with proper structure and electric field. What is10
multiplication factor ?

6. (a)

What are splices ? Explain different types of splies.

10
    (b)Explain double Crucible method of fiber fabrication.10

7.

Write short notes on any two :-

20
      (i) Linearly polarized modes
     (ii) OTDR
    (iii) Link Power Bugeting.

Friday, August 1, 2014

DATA COMPRESSION AND ENCRYPTION (DCE) DECEMBER 2012 [ELECTIVE] ELECTRONICS AND TELECOMMUNICATION SEMESTER 7

DATA COMPRESSION AND ENCRYPTION (DCE) MAY 2012  [ELECTIVE] ELECTRONICS AND TELECOMMUNICATION SEMESTER 7

Con. 8490-12.                                                                                    KR-1980
                                                       (3 Hours)                                              [Total Marks : 100]

N.B. : (1) Question No. 1 is Compulsory.
          (2) Attempt any four questions out of remaining six questions.
          (3) Assume suitable data if needed.
          (4) Figures to be right indicates full marks.

1. (a)Brief explain Modelling and coding with respect to data compression.5
    (b)Explain the principle of Public Key Cryptography.5
    (c)Explain the working principle of Arithmatic Coding with suitable example.5
    (d)Expalin Chinese remainder theorem.5

2. (a)

Define the following terms :-

10
       (i) Compression Ratio
       (ii) Distrotion
       (iii) Compression Rate
       (iv) Fidelity and Quality
       (v) Self information.
    (b)Explain Diffie - Hellman key exchange algorithm with example.10

3. (a)

What is adaptive dictionary based coding. Explain any one method.

10
    (b)What is the signifiance of 'prime number' is public key cryptography ? Explain10
RSA algorithm with a suitable example.

4. (a)

Explain DPCM and ADPCM techniques used in audio compression.

10
    (b)What is Malicious Programe ? Explain different types of malicious programmes.10

5. (a)

Explain audio encoder and decoder used in MPEG.

10
    (b)Explain Digital Immune System.10

6. (a)

Design Huffman code for a source which generate letters from an alphabet.

10


    Also calculate entrophy of the source.
    (b)What is message digiest ? Explain HMAC algorithm.10

7.

Write short notes on any two :-

20
      (a) JPEG 2000
      (b) Key Distribution Centre
      (c) Fire wall Design
      (d) Difference between :-
                   (i) Lossy and Lossless compression
                   (ii) Audio Compression and Image Compression.

Thursday, July 31, 2014

COMPUTER COMMUNICATION NETWORKS (CCN), B.E. Electronics & Telecommunication, Semester 7, December 2012.

COMPUTER COMMUNICATION NETWORKS (CCN),

B.E. Electronics & Telecommunication,

Semester 7, December 2012.
Con. 8440-12
KR- 1530
(REVISED COURSE)

(3 Hours)
[Total Mark: 100]
N.B. (1) Question No 1 is compulsory.

(2) Attempt any four questions out of remaining six questions.

(3) Assume suitable data wherever necessary.

1. (a) What is IP address, physical address, port number and socket address of a device. ---- (5 Marks)

(b) What is piggybacking? How is its use significant? ----- (5 Marks)

(c) Where is the MAC sub layer placed in the OSI model? What does it deal with and what services does it provide. ---- (5 Marks)

(d) Explain the role of internet layer and Network Interface Layer. ---- (5 Marks)

2. (a) What is flow control? Explain stop and wait ARQ with its state diagram. ---- (10 Marks)

(b) Compare packet switching, circuit switching and cell switching techniques with the help of timing diagram. ---- (10 Marks)

3. (a) Describe station types, configuration and communication (response) modes supported by HDLC protocol. ----- (10 Marks)

(b) Explain Repeater, Bridges, Routers and Switches. ---- (10 Marks)

4. (a) Explain how fragmentation and reassembly helps IP to work on a variety of physical networks. ------ (10 Marks)

(b) Differentiate between TCP and UDP. ---- (10 Marks)

5. (a) Explain the following medium sharing techniques: ----- (10 Marks)

(i) Reservation

(ii) Polling

(iii) Token passing.

(b) Explain Transparent bridges. Also show how bridge learning takes place with appropriate example. ----- (10 Marks)

6. (a) Discuss Queuing System classification. Explain M/M/I queuing system. ---- (10 Marks)

(b) For the graph shown in the figure show the successive iterations of the Dijkstr’s method of Shortest Path Algorithm. Take node 1 as the root node. ----- (10 Marks)
7. Write short notes on any two: ---- (20 Marks)

(a) Mobile IP

(b) DHCP

(c) OSPF

Tuesday, July 29, 2014

MICROPROCESSORS AND MICROCONTROLLERS - 2 (MPMC) DECEMBER 2012 [EXTC] ELECTRONICS AND TELECOMMUNICATION SEMESTER 6

MICROPROCESSORS AND MICROCONTROLLERS - 2 (MPMC) DECEMBER 2012 [EXTC] ELECTRONICS AND TELECOMMUNICATION SEMESTER 6

Con.8257-12                                                                                                  KR-8720

                                        (3 Hours)                                                      [Total Marks:-100]

N.B: (1) Questions No.1 is compulsory.
        (2) Attempt any four questions from remaining six questions.

Q.1 (a) Compare 8086 and 8088 microprocessor. [4 Marks]
       (b) Write function for following pin for 8086 microprocessor. [6 Marks]
               (i) 
              (ii) 
             (iii) 
       
       (c) Explain status register of PIC 18. [5 Marks]
       (d) Write a program for PIC 18 to configure PORT B as output send 55 and AA atternately
             to PORT B. [5 Marks] 

Q.2 (a) Explain interrupt structure of 8086 microprocessor. [10 Marks]
       (b) Explain difference between 8086, 80186, 80286,80386 and 80486 microprocessor.
             [10 Marks]

Q.3 (a) Explain addressing modes of 8086 microprocessor. [10 Marks]
       (b) Explain following instruction of PIC-18 [10 Marks]
             (i) BTFSS F,b, A
            (ii) XORWF F,d,a
           (iii) ADDLW 0 x 25
           (iv) MOVFF
           (v) NEGF f,a.

Q.4 (a) Explain instruction formate used in PIC-18. [10 Marks]
       (b) Explain maximum mode of 8086 microprocessor. [10 Marks]

Q.5 (a) Draw and explain interfacing of 8086-8295 PIC. [10 Marks]
       (b) Explain features of coprocessor 8087. Explain interfacing with 8086 microprocessor.
             [10 Marks]

Q.6 (a) Explain I/O port structure of PIC-18. [10 Marks]
       (b) A Bank of 8 push buttons keys are connected to PORT B of PIC-18. Write a program to
            recognize key pressed, debounce key and identify location in the key bank with numbers
            from 0 to 7. [10 Marks]   

Q.7 (a) Explain assembler directives used in 8086 microprocessor. [10 Marks]
       (b) Explain pipeline concept used in PIC-18. [10 Marks]

Thursday, July 24, 2014

SOFTWARE ARCHITECTURE(SA) COMPUTER SCIENCE DECEMBER 2012 SEMESTER 8

SOFTWARE ARCHITECTURE(SA) COMPUTER SCIENCE DECEMBER 2012 SEMESTER 8  

Con. 9128-12.                              (REVISED COURSE)                                          KR-4407
                                                           (3 Hours)                                          [Total Marks : 100]

N.B. : (1) Question No. 1 is compulsory.
          (2) Attempt any four from remaining six questions.
          (3) Figures to the right indicate full marks.

1. (a)What is a difference between view and view point ?4
    (b)What are the different types of connectors based on interactive services ?4
    (c)What is a difference between one-way and round-trip mapping ?4
    (d)What is a reference architecture ? How does it differ from an ordinary Software4
Architecture ?
    (e)Differentiate between software architecture software design.4

2. (a)

Name and describe the different deployment activities.

10
    (b)Explain the distributed object style in connection with CORBA middleware10

3. (a)

What type of applications are applicable for following styles and give examples of

10
each -
      (i) Event-based
      (ii) Pipe and filter
      (iii) Layrered
      (iv) Mobile Code
      (v) Black-board.
    (b)How is perscriptive architecture different from descrptive architeture ? Explain10
with example.

4. (a)

Is scenario driven analysis a special case of static analysis or dynamic analysis. Justify

5
with one example each.
    (b)Why is system based analysis important if you have already competed component5
and connector level analysis ?
    (c)What is an architecture implementation framework ? How does an architecture5
implementation framework differ from middleware ?
    (d)Write short note on domain specific software architecture.5

5. (a)

What do you mean by stakeholder Driven modeling ? Explain in detail.

10
    (b)Discuss Service Oriented Architecture (SOA) and web services.10

6. (a)

What is REST ? Explain its architecture.

10
    (b)With the help of an example,explain different types of inconsistencies is an architectural10
model.

7.

Write short notes on the following :-

20
       (a) Software Architecture and Deployment
       (b) Hightweight C2 Framework.

Friday, July 18, 2014

HUMAN COMPUTING INTERACTION (HCI) [ELECTIVE] DECEMBER 2012 COMPUTER SCIENCE SEMESTER 8

HUMAN COMPUTING INTERACTION (HCI) [ELECTIVE] DECEMBER 2012 COMPUTER SCIENCE SEMESTER 8

1. (a)Explain various pointing Devices, what tasks can be performed with them and10
explain Direct control pointing devices.
    (b)Design an Interface for a Hand held Ticket printing machine for a Bus conductor.10

2. (a)

Explain User Interface Design Process in Detail.

10
    (b)What are various methods to determine the requirements for designing user10
interface.

3. (a)

Show different statistical graphics in designing interface screen.

10
    (b)What are possible uses of colours and problems associated with it ? Give guidelines10
for choosing Background and foreground colours for web page.

4. (a)

Describe the characteristics and capabilities of two Direct and two Indirect device

10
based controls ? Give the guidelines for selecting prober device based control.
    (b)What are different types of menus ? Explain structure of menus.10

5. (a)

Write a detail note on speech recognition digitization and generation.

10
    (b)What are mental models and why are they important in interface design ?10

6. (a)

What do you mean by user navigation and user communication.

10
    (b)Explain various tools used for desigining user interface.10

7. (a)

Write short note on Designing a user interface for visually impaired.

10
    (b)Write a brief note on various kinds of Grapical menus.10

Thursday, July 17, 2014

SOFT COMPUTING (SC) [ELECTIVE], Semester 7, B.E. Computer Science (CS), December 2012.

SOFT COMPUTING (SC) [ELECTIVE], Semester 7,

B.E. Computer Science (CS), December 2012.
Con.10900-12
(REVISED COURSE)
KR- 1899
(3 Hours)
[Total Mark: 100]

N. B.: (1) Question no 1 is compulsory.

(2) Attempt any four questions out of the remaining questions.

1. (a) Model the following as Fuzzy set using suitable membership function “number close to 6”. ---- (5 Marks)

(b) Draw CANFIS architecture for Sugeno Fuzzy Model. ---- (5 Marks)

(c) Explain the different Fuzzy membership function. ---- (5 Marks)

(d) Explain Single Continues perceptron training Algorithm (SCPTA). ---- (5 Marks)

2. Design a Fuzzy controller to determine the wash time of domestic washing. Assume that input is dirt and grease on clothes. Use three descriptor for input variables. Derive set of rules for control the action and defuzzification. The design should be supported by the figures. Show that if the clothes are soiled to a larger degree the wash time will be more and vice- versa. ---- (20 Marks)

3. (a) Prove the following identities: ---- (10 Marks)

(i) For unipolar continuous activation function f ‘ (net) = O(1 - O)

(ii) For bipolar continuous activation function f ‘ (net) = O(1- O2) / 2
Where O is out.

(b) Explain Genetic Algorithm with the help of example. --- (10 Marks)

4. (a) Explain Error back propagation training algorithm with the help of a flowchart. ---- (10 Marks)

(b) Explain any four defuzzification methods with suitable Example. ---- (10 Marks)

5. (a) Explain with an example McCulloch – pitts neuron model. --- (6 Marks)

(b) Explain with neat diagram supervised and unsupervised learning. --- (6 Marks)

(c) State the different properties of Fuzzy set. ---- (8 Marks)

6. (a) Describe the basic Hopfield model and give the theory of energy Minimization in auto- associative Hopfield network. ---- (10 Marks)

(b) Explain the architecture of Bidirectional associative memory. Hoe is stored and retrieval performed in BAM? ---- (10 Marks)

7. Write short notes on any two of the following: ----- (20 Marks)

(a) TSP using simulated Annealing

(b) RBF network

(c) Multicategory perception training algorithm. (MCTPA).

Multimedia System Design (MSD) Semester 8 (Revised Coures) (3 Hours) December 2012

Multimedia System Design
Multimedia System Design (MSD)
Semester 8 (Revised Coures)
(3 Hours) December 2012

 
KR-4623
[ Total Marks : 100 ]
N.B: (1) Question no 1 is compulsory.  
  (2) Solve any four questions from the remaining six questions.  
  (3) Assume suitable data wherever required.  
       
1. (a) Explain elements of multimedia systems. 05
  (b) Compare and contract TIFF format and RIFF file format. 05
  (c) Describe the algorithm for CCITT group 3 std. How does CCITT group 4 differ from CCITT group 3? 10
       
2. (a) What is Authoring System? Explain different types of Authoring System. 10
  (b) Draw neat labelled diagram for flat bed scanner. Explain scanning mechanism and CCD used in scanning operations. 10
       
3. One of most important application using both technologies networks and multimedia is distance learning. you are appointed as a consultant to design the system. For such an application :- 20
  (a) Specify the hardware and software requirements for the same, if this application is to be used in distributed environment.  
  (b) Design its workflow and hence design the entire multimedia system.  
       
4. (a) Explain MPEG-1 compression in detail. 10
  (b) Explain multimedia system architecture. 10
     
5. (a) Explain in detail MIDI communication protocol. 10
  (b) What are the components of Distributed multimedia systems. 10
       
6. (a) Explain copyright act of multimedia. 10
  (b) How to manage resource during multimedia transmission. 10
       
7. write short notes on any two  :- 20
  (a) Multimedia system design methodolgy  
  (b) Knowledge based multimedia systems.  
  (c) Distributed multimedia Database.  

Monday, July 14, 2014

DISTRIBUTED COMPUTING (DC) DECEMBER 2012 COMPUTER SCIENCE SEMESTER 8

DISTRIBUTED COMPUTING (DC) DECEMBER 2012 COMPUTER SCIENCE SEMESTER 8

Con. 10254-12.                      (REVISED COURSE)                                           KR-5238
                                                    (3 Hours)                                             [Total Marks : 100]


N.B. : (1) Question No. 1 is compulsory.
          (2) Answer any four from the remaining six.

1. (a)Explain the reasons why use and popularity of distributed systems are rapidly10
increasing despite the increased complexity and difficulty of building it.
    (b)Explain how transparency is achieved in remote Procedure Calls.10

2. (a)

With neat diagrams, explain the failure handling mechanisms for message passing.
10
    (b)Compare stateful and sateless servers.10

3. (a)

What are the commonly used semantics for ordered delivery of multicast

10
messages ?
    (b)Define thrashing. What are the methods used for solving thrashing problems ?10

4. (a)

Explain the distributed algorithm for clock synchronization.

10
    (b)What are the common strategies used for handling deadlocks in distributed10
system.

5. (a)

Explain the different Load estimation policies and process transfer policies used by

10
load balancing algorithms.
    (b)With neat diagrams explain the commonly used ways in which threads of process10
are organized.

6. (a)What are the main approaches to verify the validity of cached data in DFS ?10
    (b)Compare the characteristics features of system oriented names and Human10
Oriented names.

7.Write short notes on (any two) :-20
      (a) Distributed Computing Environment (DCE)
      (b) Heterogeneous DSM
      (c) Election algorithms.
      (d) Fault tolerance of DFS.

Friday, July 11, 2014

SYSTEM SECURITY(SS) DECEMBER 2012 COMPUTER SCIENCE SEMESTER 7

SYSTEM SECURITY (SS) DECEMBER 2012 COMPUTER SCIENCE SEMESTER 7 

Con.8447-12.                                            (REVISED COURSE)                         KR-1494


                                                                        (3 Hours)                              [Total Marks:-100]

N.B: (1) Question No.1 is compulsory.
        (2) Attempt any four questions out of remaining six questions.
        (3) Assume data if required and state it clearly.

Q.1 (a) Explain different security mechanisms. [5 Marks]
       (b) Explain the steps used to construct knapsack crptosystem. [5 Marks]
       (c) What is personal firewalls? [5 Marks]
       (d) Explain different Targeted Malicious Code. [5 Marks]

Q.2 (a) What is the difference between Substitution Cipher and Transposition Cipher? Explain
             Additive Cipher and Double Transposition Cipher with example. [10 Marks]
        (b) What are different types of vulnerability, threat and control? Give example of
              each. [10 Marks] 

Q.3 (a) What is denial of service attack? What are the way in which on attack can mount a
             DOS/DDOS attack on the system? [10 Marks]
       (b) Write short note on Access Control Lists (ACL) and . [10 Marks]

Q.4 (a) Explain different authentication methods and protocols. [10 Marks]
       (b) Explain cryptographic hash function criteria and compare MO5 and SHA-1. [10 Marks]

Q.5 (a) Explain different types of data link layer vulnerability. [10 Marks]
       (b) Explain various types of port scan. [10 Marks]

Q.6 (a) Explain methods used to commit session hijack. What is SQL Injection? Give
            example. [10 Marks] 
       (b) What are the network level threats to web server? Explain. [10 Marks]

Q.7 Write short notes on the following :- [20 Marks]
        (a) Digital Signature
        (b) Multilateral Security
        (c) Digital Rights Management
        (d) Various ways of memory and address protection.

Thursday, July 10, 2014

E-commerce [Elective] Semester 7 (Revised Course) (3 Hours) December 2012

E-commerce
E-commerce [Elective]
Semester 7 (Revised Course)
(3 Hours) December 2012

 
KR-1878
[Total Marks : 100]
 
N.B: (1) Question no 1 is compulsory.  
  (2) Attempt any four questions out of remaining six questions.  
  (3) Assume suitable data, if necessary.  
       
1. (a) Compare wants t host E-commerce website, IT officer of the company has given three choice :-
  (i) In-House hosting with dedicated IT infrastructure
  (ii) Cloud based Hosting.
  (iii) Hosting on web hosting company's server
Compare with respect to following parameters :-
  (i) Cost
  (ii) Security of E-commerce website
  (iii) User's experience
  (iv) Storage
  (v) Data privacy.
20
       
2. (a) Explain various techniques of session management in E-commerce website. 10
  (b) Describe web1.0 web 2.0 with respect to technology, features and their characteristics. 10
       
3. (a) Explain any three types of Business models used in E-Business. 10
  (b) Explain SET protocol in detail. 10
       
4. (a) Explain in detail working of Search Engine. 10
  (b) Write a detailed note on Enterprise Application Integration. 10
     
5. (a) What is web Mashup architecture? How will you used it in developing following E-commerce application :-
  (i) Movie Ticket Booking
  (ii) Travel Site Portal?
10
  (b) Define CRM and explain its architecture. 10
       
6. (a) Explain virtualization techniques and how it is used in cloud computing. 10
  (b) Explain different types of web based Auction. 10
       
7. write short notes on following (Any Two) :- 20
  (a) REST  
  (b) Semantic web  
  (c) Digital Certificate.  

Tuesday, July 8, 2014

MOBILE COMPUTING (MC) DECEMBER 2012 COMPUTER SCIENCE SEMESTER 7

MOBILE COMPUTING (MC) DECEMBER 2012 COMPUTER SCIENCE SEMESTER 7
Con. 8408-12.                                                                                                    KR-1278
                                                       (3 Hours)                                          [Total Marks : 100]

N.B. : (1) Question No. 1 is compulsory.
          (2) Attempt any four questions out of remaining six questions.
          (3) Assume suitable data if necessary.

1. (a)What are benefits of Spread Spectrum systems ?5
    (b)What do you mean by Hidden terminal and Exposed terminal problems ?5
    (c)What is SDMA ? How does it suit to mobile cellular systems ?5
    (d)List and explain GSM services.5

2. (a)

Draw and explain Bluetooth protocol stack in detail.

10
    (b)Compare between IEEE 802.11 and HIPERLAN2.10

3. (a)

What is Mobile IP ? Describe it in detail.

10
    (b)Discuss Mobile Transport Layer.10

4. (a)

Draw a neat diagram of GSM system architecture and explain with different types of

10
interfaces.
    (b)Describe the Mobile satelite system (LEO & MEO).10

5. (a)

List the MANET routing protocols. Describe any two protocols in detail.

10
    (b)What is IMT-2000 ?10

6. (a)

Draw a neat diagram of WAP architecture and explain in detail.

10
    (b)What is WATM ? Describe the WATM reference Model and Services.10

7.

Write short notes on following any four :-
      (a) WCDMA Vs CDMA 20005
      (b) Mobile OS5
      (c) WiMax5
      (d) GPRS5
      (e) WML.5

Saturday, July 5, 2014

ROBOTICS AND ARTIFICIAL INTELLIGENCE (RAI), B.E. Computer Science (CS), Semester 7, December 2012.

ROBOTICS AND ARTIFICIAL INTELLIGENCE (RAI),

B.E. Computer Science (CS), Semester 7, December 2012.
Con.8367-12
KR- 1161
(3 Hours)
[Total Mark: 100]
N. B.: (1) Question no 1 is compulsory.

(2) Attempt any four questions out of the remaining questions.

(3) Assume suitable data if necessary.

1. Answer the following question in brief: - ---- (20 Marks)

(a) Briefly explain the role of Robotics in Industries.

(b) Explain in brief the forward and inverse Kinematics.

(c) Explain Heuristic function with example.

(d) List sensors used for reactive robot.

2. (a) Describe DH parameters with suitable sketch. --- (6 Marks)

(b) Find the Kinematic transformation matrix using DH Method for following robot. --- (14 Marks)
3. (a) Explain how you will formulate search problem. Formulate 8-puzzle problem. --- (6 Marks)

(b) Describe Depth – first search using suitable example. --- (4 Marks)

(c) What do you mean an admissible hearistics function? Discuss with suitable example. --- (5 Marks)

(d) Describe IDA* search algorithm giving suitable example. --- (5 Marks)

4. (a) Describe backward – chaining algorithm for propositional logic. --- (6 Marks)

(b) Represent the following sentences in first – order logic, using a consistent vocabulary. --- (4 Marks)

(i) Every person buys a policy is smart.

(ii) No person buys an expensive policy.

(iii) There is an agent who sells policies only to people who are not insured.

(iv) There is a barber who shaves all men in town who do shave themselves.

(c) Describe backward chaining algorithm with example. --- (10 Marks)

5. (a) You have two neighbours, John and Mary who have promised to call you at work when they hear the alarm. John always calls when he hear the alarm, but sometimes confuses the telephone ringing with the alarm and calls then, too. Mary on the other hand, likes rather loud music and sometimes misses the alarm altogether. Given the evidence of who has or has not called, we would like to estimate the probability of a burglary. Draw a Bayesian network for this domain with suitable probability tables. --- (10 Marks)

(b) Give steps in designing the Reactive Behavioral System. ---- (10 Marks)

6. (a) What is planning problem? How it differs from search problem? --- (5 Marks)

(b) Explain screw Transformation. --- (5 Marks)

(c) Explain supervised, unsupervised and reinforcement learning with example. --- (10 Marks)

7. (a) Describe following electrical actuators, DC motor, Sunchronous motor, Stepper motor. --- (10 Marks)

(b) Explain following sensors used in robotics application, Potentiometer, Inductor, Capacitor, LVDT. --- (10 Marks)

Wednesday, July 2, 2014

DATA WAREHOUSE AND DATA MINING (DWDM) DECEMBER 2012 COMPUTER SCIENCE SEMESTER 6

DATA WAREHOUSE AND DATA MINING (DWDM) DECEMBER 2012 COMPUTER SCIENCE SEMESTER 6

Con. 8161-12.                                                                                              KR-9224
                                           (3 Hours)                                                [Total Marks : 100]

Note: 1. Question 1 is compulsory
         2. Answer any 4 out of the remaining questions.
         3. Answers to sub questions must be written together.

Q1. (a)Consider the following database for a chain of bookstores.
BOOKS (Booknum, Primary_author, Topic, Total_stock, price)
BOOKSTORE (Storenum, City, State, Zip, Inventory_value)
STOCK (Storenum, Booknum, Qty)
With respect to the above business scenario, answer the following questions. Clearly state
any resonable assumptions you make.
(i) Design an information package diagram.(5)
(ii) Design a star schema for the data warehouse clearly identifying the Fact table(s).(5)
Dimension table(s), their attributes and measures.
      (b)Consider the 5 transactions given below. If minimum support is 30% and minimum(10)
confidence is 80%, determine the frequent itemsets and association rules using the a
priori algorithm.


Q2.Define the following terms by giving examples (5x4)(20)
(a) Factless Fact tables
(b) Snowflake Schema
(c) Web structure Mining
(d) Classification

Q3. (a)Explain the ETL cycle for a data warehouse in detail.(10)
      (b)Give five examples of application that use Clustering. Describe(10)
any one clustering algorithm with the help of an example.

Q4. (a)Consider a data warehouse storing sales details of various sold, and the(10)
time of the sale. Using this example describe the following OLAP operations
(1) Slice (2) Dice (3) Rollup (4) Drill down
      (b)With a neat diagram describe the KDD process(10)

Q5. (a)

What do you mean by web mining? Explain any one web mining algorithm

(10)
      (b)Describe the different features of a web enabled data warehouse. Give two example(10)
applications where such a system would be used.

Q6. (a)Explain spatial and temporal data mining.(10)
       (b)What is the role of Meta data on a data warehouse? Illustrate with examples(10)

Q.7

Describe through a short note each of the following topics (10X2)

(20)
(a) DMQL
(b) Visualization techniques for Data warehousing and mining

Saturday, June 21, 2014

ADVANCED MICROPROCESSOR (AMP) DECEMBER 2012 COMPUTER SCIENCE SEMESTER 6

ADVANCED MICROPROCESSOR (AMP) DECEMBER 2012 COMPUTER SCIENCE SEMESTER 6

Con. 8288-12.                                                                                                   KR-8810
                                                          (3 Hours)                                       [Total Marks : 100]                                                        
N.B. : (1) Question No. 1 is compulsory.
          (2) Solve any four questions out of remaining six questions.
          (3) Draw neat diagrams wherever necessary.

1. (a)Draw and explain the block diagram of Hanium processor. Also expalin its salient10
features.
    (b)Explain the data cache organisation of Pentium.10

2. (a)

Explain the floating point pipeline stages. Also explain the list of steps in instruction

10
issue algorithm.
    (b)Explain how flushing of pipeline can be minimized in Pentium architecture. Also10
explain the instruction pairing rules for Pentium.

3. (a)

List and explain the important features of Pentium II processor. Also differentiate

10
between Pentium II and Pentium III
    (b)Explain segmentation mechanism in 80386 DX and hence draw and explain the10
protected mode address translation mechanism in 80386 DX.

4. (a)

List the features of 8 bit, 18 bit and 32 bit EISA.

10
    (b)Draw and explain the work station based method of PCI bus and explain its10
features.

5. (a)

Explain the dynamic branch prediction logic in Pentium.

10
    (b)Draw and expalin the state transitions diagram for Pentium processor bus cycle.10

6. (a)

Explain the debug register of Pentium.

10
    (b)Explain the protection mechanism in 386 DX via Callgates, Priviledge Levels.10

7.

Write short notes on :-

20
(a) Layered architecture of SCSI
(b) USB
(c) Dta types supported by SPARC
(d) Architecture of Super SPARC

Thursday, June 19, 2014

Computer Graphic (CG) Semester 4 (Revised Course) (3 Hours) December 2012

Computer Graphic

Computer Graphic (CG)
Semester 4 (Revised Course)
(3 Hours) December 2012

 

KR-7253
[Total Marks : 100]
 

N.B: (1) Questions no 1 is compulsory.  
  (2) Attempt any four out of remaining questions.  
  (3) Assume suitable data if necessary and justify the same.  
       
1. (a) illustrate inside outside test. 05
  (b) Explain 3D display methods. 05
  (c) What is Z-buffer algorithm? 05
  (d) Write a note on Fractures. 05
       
2. (a) What is display file structure? Also explain the need for display file interpreter. 10
  (b) Write a pseudo-code to implement boundary fill and flood fill algorithm using 4 connected method. 10
       
3. (a)
Write an algorithm to fill polygon in fig (a) with pattern given in fig (b) of size m x n.
10
  (b) Derive Bresenham's line drawing algorithm for lines with slope <i. 05
  (c) Write different applications of computer Graphics. 05
       
4. (a) What do you mean by segment? What are the various attributes in segment table? State which operations can be done on segments and explain the same. 10
  (b) Derive the steps required to perform 3D rotations about arbitary axis. 10
     
5. (a) Find the clipping Co-ordinates to clip the line segment P1P2 against the window ABCD using cohen Sutherland line clipping algorithm.
     P1 (10, 30) P2 (80, 90)
     Window ABCD A (20, 20) B (90, 20)
                              C (90, 70) D (20, 70)
10
  (b) What do you understand by terms parallel and perspective projection? Also explain depth cueing. 10
       
6. (a) Explain Gouard and Phong shading. 10
  (b) Explain Bezier curves and Bezier surface with equations. Explain properties of Bezier curve. 10
       
7. Write short notes on :- 20
  (a) Animation  
  (b) Dithering techiniques  
  (c) Warnock's algorithm  
  (d) Half toning  
  (e) Raster techniques.  

Wednesday, June 18, 2014

ADVANCE COMPUTER NETWORKS (ACN) DECEMBER 2012 COMPUTER SCIENCE SEMESTER 6

ADVANCE COMPUTER NETWORKS (ACN) DECEMBER 2012 COMPUTER SCIENCE SEMESTER 6

Con. 8219-12.                                                                                                    KR-9095
                                                          (3 Hours)                                        [Total Marks : 100]

N.B. : (1) Question No. 1 is compulsory.
          (2) Attempt any four questions out of remaining six questions.

1. (a)Explain TCP/IP protocol suite.10
    (b)Explain different QoS parameters in case of ATM.10

2. (a)

What is the need of BGP ? Explain BGP protocol in detail.

10
    (b)What is SNMP ? Explain SNMP PDU format and messages.10

3. (a)

Explain multicast routing protocol ? Explain DVMRP in detail.

10
    (b)Explain Network Address Translation. Discuss SNAT and DNAT.10

4. (a)

Describe different delay components in communication network. Explain M/M/1

10
Queuing system
    (b)Explain in detail architecture of ATM Network.10

5. (a)

Explain following connectors in brief :-

10
(i) Repeaters
(ii) Hubs
(iii) Bridges
(iv) Routers
(v) Switches.
    (b)Draw and explain functions of SONET layers.10

6. (a)

Explain H.323 standard in detail

10
    (b)What is RTP ? Explain RTP frame format in detail.10

7.

Write short notes on :-

20
      (a) IP over ATM
      (b) Multi Protocol Label Switching (MPLS)
      (c) X.25
      (d) RSVP.

Tuesday, June 17, 2014

WEB ENGINEERING (WE), B.E. Computer Science (CS), Semester 5, December 2012.

WEB ENGINEERING (WE), B.E. Computer Science (CS),

Semester 5, December 2012.
Con.7566-12
KR-5489
(3 Hours)
[Total Mark: 100]

N. B.: (1) Question no 1 is compulsory.

(2) Attempt any four questions from remaining questions from Q. Nos. 2 to 7.

(3) Specify your answer with examples and diagram wherever necessary.

1. Attempt the following questions: --- (20 Marks)

(a) List various client side and server side Technologies.

(b) What do you mean by web browser, what facilities it provides to the user?

(c) List various tags in HTML with simple example for a web page.

(d) What do you mean by internal and external style sheet?

2. (a) What do you mean by components of generic web application architecture? Explain in detail. --- (10 Marks)

(b) Explain 2 Tier and 3 Tier Architecture for web application. --- (10 Marks)

3. (a) Write short note on: ---(10 Marks)

(i) Content modelling

(ii) Access modelling.

(b) Write a code in any web development tool to represent ordered and unordered list, form, tables and images for a web page. --- (10 Marks)

4. (a) You are appointed as Team Leader for a web based application for online Admission process of first year Engineering, find all the stake holder for this and give a simple format of application form that will be displayed on screen (do not write any code). – (15 Marks)

(b) Explain all attributes for Tables in HTML. ---(5Marks)

5. (a) What is XML, XSL, DTD? Explain with simple example. --- (10 Marks)

(b) Explain in detail characteristics of web applications. --- (10 Marks)

6. (a) Differentiate between Get and Post method for a web based application,. Write a simple code to explain the same. --- (10 Marks)

(b) Explain in brief Requirement Engineering activities. ---(10Marks)

7. (a) Explain role of tester in testing web application. --- (10 Marks)

(b) What do you mean by content management system? --- (10 Marks)