Showing posts with label Wireless Networks (WN). Show all posts
Showing posts with label Wireless Networks (WN). Show all posts

Thursday, August 7, 2014

B.E. Electronics & Telecommunication, Wireless Networks (WN), Semester 8, December 2012.

B.E. Electronics & Telecommunication,

Wireless Networks (WN), Semester 8, December 2012.
Con. 10020-12
KR- 5094
(REVISED COURSE)

(3 Hours)
[Total Mark: 100]
N.B. (1) Question No 1 is compulsory.

(2) Attempt any four questions out of remaining six questions.

(3) Draw neat sketches wherever required.

(4) Assume suitable data if required.

1. (a) What is role of General Packet Radio Services (GPRS) in the GSM. ---- (5 Marks)

(b) Why is power control used in CDMA 2000 and WCDMA? ---- (5 Marks)

(c) Explain the security aspect of Bluetooth. ----- (5 Marks)

(d) Write various uses of Wireless Sensor Network. ---- (5 Marks)

2. (a) Explain UMTS network reference architecture in detail. ----- (10 Marks)

(b) Discuss QoS attributes used in UMTS. ----- (10 Marks)

3. (a) Discuss the forward and reverse link channels in CDMA 2000.----- (10 Marks)

(b) Explain evolution of IS – 95 in detail. --- (10 Marks)

4. (a) Explain Link budget analysis and requirements of wireless network. ---- (10 Marks)

(b) Draw and explain WAP programming model in detail. ---- (10 Marks)

5. (a) Define and explain different terms used in Bluetooth. ---- (10 Marks)

(b) Explain wireless sensor network protocol stack in detail. ----- (10 Marks)

6. (a) Compare all versions of IEEE 802.11 WLAN. ----- (10 Marks)

(b) Give the advantages, disadvantages and application of WAP. ---- (10 Marks)

7. (a) Compare CDMA 2000 and WCDMA. ----- (10 Marks)

(b) Write a short note on RFID. ---- (10 Marks)

B.E. Electronics & Telecommunication, Wireless Networks (WN), Semester 8, December 2013.

B.E. Electronics & Telecommunication,

Wireless Networks (WN), Semester 8, December 2013.
Con. 8981–13.
LJ - 13868
(REVISED COURSE)

(3 Hours)
[Total Mark: 100]
N.B. (1) Question No 1 is compulsory.

(2) Attempt any four questions out of remaining six questions.

(3) Draw neat sketches wherever required.

(4) Assume suitable data if required.

1. (a) List out of components of sensor nodes. ---- (5 Marks)

(b) What is adaptive multirate coding? ---- (5 Marks)

(c) Explain the concept of hidden node and exposed node with respect to WLAN.---- (5 Marks)

(d) List out services provided by 3G Networks. ---- (5 Marks)

2. (a) Explain park, hold and sniff mode of operations in Bluetooth. Draw the complete flow diagram for network connection establishment in Bluetooth. --- (10 Marks)

(b) Compare WAP and imode protocol stack. ---- (10 Marks)

3. (a) Explain sensor Network protocol stack in detail. ----- (10 Marks)

(b) Explain the concept of High Speed Downlink packet access in detail.---- (10 Marks)

4. (a) Calculate the uplink cell load factor and number of voice user for a WCDMA system using the following data. What is the pole capacity of the cell? ----- (10 Marks)
  • Information rate (Ri) : 12.2 kbps
  • Chip ratr (Rc) : 3.84 Mcps
  • Required Eb/Nt : 4 dB
  • Required interference margin : 3 dB
  • Interference factor due to other cells : 0.5
  • Channel activity factor : 0.65
(b) Explain transmit diversity present in forward link of cdma 2000.---- (10 Marks)

5. (a) Explain link budget analysis and requirements of wireless networks. ---- (10 Marks)

(b) Explain UMTS network architecture. List important features of the UMTS interface. Support your answer with neat block diagram.---- (10 Marks)

6. Write short note on : ---- (20 Marks)

(a) Zigbee Protocol

(b) Wimax

7. (a) Explain LR – WPAN device architecture with suitable diagram . ---- (10 Marks)

(b) State and explain commonly used wireless LAN topologies with diagram. ---- (10 Marks)

Wednesday, August 6, 2014

B.E. Electronics & Telecommunication, Wireless Networks (WN), Semester 8, May 2013.

B.E. Electronics & Telecommunication,

Wireless Networks (WN), Semester 8, May 2013.
Con. 8551–13.
GS - 3673
(REVISED COURSE)

(3 Hours)
[Total Mark: 100]
N.B. (1) Question No 1 is compulsory.

(2) Attempt any four questions out of remaining six questions.

(3) Draw neat sketches wherever required.

(4) Assume suitable data if required.

1. (a) Explain forward link features of CDMA 2000. ---- (4 Marks)

(b) Explain concept of HSDPA with respect to WCDMA. ---- (4 Marks)

(c) What is adaptive multirate coding? ----- (4 Marks)

(d) Give different WLAN topologies. ----- (4 Marks)

(e) Explain the concept of OFDM. ---- (4 Marks)

2. (a) Explain in detail components of sensor node. ---- (10 Marks)

(b) Explain in detail various IEEE 802.11 standard used in wireless Network. ---- (10 Marks)

3. (a) Difference between WCDMA and CDMA 2000. ---- (10 Marks)

(b) Calculate the downlink cell load factor and number of voice users per cell for a WCDMA system using the following data. ---- (10 Marks)

- Information Rate (Ri) = 12.2 Kbps

- Chip Rate (Rc) = 3.84 Mops

- Required Eb/Nt = 4 dB

- Average interference factor due to other cells = 0.5

- Orthogonality factor = 0.6

- Interference margin = 3 db

4. (a) Give UMTS Air – Interface specifications, also explain 3 types of channels defined in UMTS. --- (10 Marks)

(b) Explain blue tooth protocol stack. ---- (10 Marks)

5. (a) Describe forward link and reverse link physical channels for CDMA 2000. ---- (10 Marks)

(b) Explain WLAN technologies in detail. ---- (10 Marks)

6. (a) Discuss in detail WAP programming model. ---- (8 Marks)

(b) Using the following data for GSM 1800, Develop downlink and uplink budget and determine cell radium. ---- (12 Marks)

- Base station transmit power = (Pb) = 36 dBM = 4 W

- Mobile station transmit power = Pm = 24 dbm

- Base station noise figure = 5 dBs

- Mobile station (hand held unit) noise figure = 8 dBs

- Base station transmit and receive antenna gain = GA= 18 dBi

- Mobile antenna gain = 0 dBi

- Required signal to noise ratio (SNR) = 12 dB

- Transmit antenna Cable, Connector Loss = Lc = 5 dB

- BS receiver antenna cable, connector Loss (Lc = 2 dB)

- Orientation / body loss of mobile = 3 dB

- Shadow fading = 10.2 dB

- Thermal noise density = -174 dBm/Hz

- Antenna diversity gain at Bs = 5 dB

7. Write short notes on: --- (20 Marks)

(a) Wimax

(b) Zigbee Protocol.

B.E. Electronics & Telecommunication, Wireless Networks (WN), Semester 8, May 2012.

B.E. Electronics & Telecommunication,

Wireless Networks (WN), Semester 8, May 2012.
Con. 3964 – 12
GN - 7634
(REVISED COURSE)

(3 Hours)
[Total Mark: 100]
N.B. (1) Question No 1 is compulsory.

(2) Attempt any four questions out of remaining six questions.

(3) Draw neat sketches wherever required.

(4) Assume suitable data if required.

1. (a) Explain RAKE receiver in CDMA. ---- (5 Marks)

(b) Explain various states in Bluetooth system. ---- (5 Marks)

(c) Explain the concept of hidden and exposed terminals in WLAN. ----- (5 Marks)

(d) What is frequency reused concept in GSM? ---- (5 Marks)

2. (a) Explain in detail IS-95 forward and reverse channels in detail. ---- (5 Marks)

(b) Explain GSM architecture with a neat block diagram, highlighting all the interfaces. ---- (10 Marks)

3. (a) Draw and explain the architecture of WAP. ---- (10 Marks)

(b) Compare: ---- (10 Marks)

(i) WCDMA and CDMA 2000

(ii) IS – 95 and CDMA 2000

4. (a) “CDMA is an interference limited system". Give proper justification to support this statement. Also explain in short methods used for power control in CDMA environment. ---- (10 Marks)

(b) Explain in detail Bluetooth security features and security levels with proper diagrams. ---- (10 Marks)

5. (a) Explain Wireless Sensor Network Protocol Stack in detail. ---- (10 Marks)

(b) Explain the frame format in Bluetooth technology. ----- (10 Marks)

6.(a) Explain the following: ----- (10 Marks)

(i) WiMAX

(ii) HSPDA.

(b) Explain link budget analysis and requirements of wireless networks. ---- (10 Marks)

7. Write short notes on:- ----- (20 Marks)

(a) UMTS

(b) ZigBee Technology.

Tuesday, August 5, 2014

B.E. Electronics & Telecommunication, Wireless Networks (WN), Semester 8, May 2011.

B.E. Electronics & Telecommunication,

Wireless Networks (WN), Semester 8, May 2011.

(REVISED COURSE)

(3 Hours)
[Total Mark: 100]
N.B. (1) Question No 1 is compulsory.

(2) Attempt any four questions out of remaining six questions.

(3) Draw neat sketches wherever required.

(4) Assume suitable data if required.

1. (a) What is frequency reused in GSM? Explain. ----- (5 Marks)

(b) Explain the concept of hidden exposed terminal in WLAN. --- (5 Marks)

(c) Explain the security aspect of Bluetooth. ----- (5 Marks)

(d) Explain various WLAN topologies. ---- (5 Marks)

2. (a) Explain forward link features of CDMA 2000 and also explain basic services provided by upper layers of CDMA 2000. ---- (10 Marks)

(b) Draw the block diagram and explain GSM architecture in detail indicating all the interfaces. ---- (10 Marks)

3. (a) Explain Link budget analysis and requirements of Wireless network. ---- (10 Marks)

(b) Draw network connection establishment flow in Bluetooth and explain Park, Hold and Sniff mode in detail. ---- (10 Marks)

4. (a) Draw and explain WAP architecture in detail. ----- (10 Marks)

(b) Explain the following: ---- (10 Marks)

(i) Bluetooth protocol stack.

(ii) Bluetooth application.

5. (a) Explain logical channel hierarchy in GSM. ---- (6 Marks)

(b) Explain security aspect of GSM. ----- (6 Marks)

(c) Explain in detail Wireless sensor network. ----- (8 Marks)

6. (a) Give the advantages, disadvantages and applications of WAP. -----(10 Marks)

(b) Explain the following: ---- (10 Marks)

(i) ZigBee technology.

(ii) WIMAX

7. Compare and Contrast the following: ---- (20 Marks)

(a) GSM and CDMA

(b) IS- 95 and CDMA 2000

(c) CDMA 2000 and WCDMA

B.E. Electronics & Telecommunication, Wireless Networks (WN), Semester 8, May 2009.

B.E. Electronics & Telecommunication,

Wireless Networks (WN), Semester 8, May 2009.
Con. 3016-09
VR-4282
(REVISED COURSE)

(3 Hours)
[Total Mark: 100]
N.B. (1) Question No 1 is compulsory.

(2) Attempt any four questions out of remaining six questions.

(3) Draw neat sketches wherever required.

(4) Assume suitable data if required.

1. (a) Explain RAKE receiver in CDMA. ----- (5 Marks)

(b) Explain various states in Bluetooth system. ----- (5 Marks)

(c) List the major technical differences between cdma-2000 and W-CDMA. ---- (5 Marks)

(d) Explain authentication procedures used in IS-95. ---- (5 Marks)

2. (a) What are hand off messages in IS-95? Explain them with threshold. ----- (10 Marks)

(b) Describe the three search windows used by the mobile to track the received pilot Signals in CDMA system. ---- (10 Marks)

3. (a) Draw and explain architecture of WAP. ---- (10 Marks)

(b) Draw the architecture of air loop WLL system. Explain each block in detail. ---- (10 Marks)

4. (a) Explain various functionalities of LAC sub layers on common and dedicated Channels. ---- (10 Marks)

(b) Explain in detail Bluetooth security features and security levels with proper diagrams. ---- (10 marks)

5. Explain in detail with their flow diagrams, various call processing states in CDMA. ---- (20 Marks)

6. (a) “CDMA is an interference limited system". Give proper justification to support this statement. Also explain in short methods used for power control in CDMA environment. ---- (10 Marks)

(b) List forward link features for CDMA-2000. Explain each in brief. ---- (10 Marks)

7. Write short notes on:- ----- (20 Marks)

(a) Cell loading

(b) Gold, Kasami and Walsh Sequences

(c) FHSS used in IEEE 802.11.

(d) OFDM used in WLL.