Showing posts with label May 2013. Show all posts
Showing posts with label May 2013. Show all posts

Thursday, August 7, 2014

IMAGE PROCESSING [ELECTIVES] MAY 2013 ELECTRONICS AND TELECOMMUNICATION SEMESTER 8

IMAGE PROCESSING [ELECTIVES] MAY 2013 ELECTRONICS AND TELECOMMUNICATION SEMESTER 8

Con. 9068-13.                       (REVISED COURSE)                                            GS-3901
                                                     (3 Hours)                                             [Total Marks : 100]

N.B.  (1) Question No. 1 is Compulsory.
        (2) Attempt any four questions out of remaining six questions.
        (3) Assume suitable data wherever necessary.

1. (a)Is there any advantage of frequency domian filters over special filters ? Why ?5
    (b)Compare Canny edge detector with Laplacian of Gaussian Gaussian edge detector.5
    (c)Why is zig-zig scanning preferred in JPEG standard.5
    (d)Distinguish between lossy and lossless compression.5

2. (a)

Explain image sampling and quantisation. A medical image has a size of 8 x 8 inches.

10
The sampling resolution is 5 cycles/mm. How many pixels are required ? Will and
image of size 256 x 256 be enough.
    (b)Let V = {0, 1}. Compute De, D4, D8 and Dm distances between two pixels p and10
q . Let the pixel coordinates of p and q be (3, 0) and (2, 3) respectively for the image
shown. Find distance measures.


3. (a)

Compute 2-D DFT of 4 x 4 gray scale image given below and then compute inverse

10
2- D DFT of transform coefficient.


    (b)Explain with example how Slant transform and DCT transform of (4 x 4) image10
can be used for image compression.

4. (a)

For a given image find -

10
       (i) Digital negative of an image.
      (ii) Contrast stretching r2 = 5, r1 = 3, s2 = 6, s1 = 2
      (iii) Bit plane slicing.


    (b)Explain image enhancement in frequency domain.10

5. (a)

Perform histogram equalization for 8 x 8 image shown in table.

10
                         Image gray level distribution



    (b)Explain segmentation based on discontinuity and segmentation based on similarities.10

6. (a)

Calculate entropy and coding redundancy for the symbols given in table using Huffman

10
codes.


    (b)What is difference between image enhancement and image restoration ?5
    (c)Explain modeling the degradation function in image restoration.5

7.

Write short notes on any two :-


            (a) Wiener Filtering10
       (b) Hotellig Transform10
       (c) Homomorphic filter.10

DISCRETE TIME SIGNAL PROCESSING (DTSP) Semester 7 (3 Hours) May 2013

DISCRETE TIME SIGNAL PROCESSING
DISCRETE TIME SIGNAL PROCESSING (DTSP)
Semester 7
(3 Hours) May 2013
    GS-5332 
   [Total Marks : 100]
       
N.B. : (1) Question No. 1 is compulsory.  
  (2) Attempt any four questions out of remaining six questions.  
  (3) Assumptions made should be clearly stated.  
  (4) Assume any suitable data wherever required but justify the same.  
  (5) Figures to the right indicate marks.  
  (6) Illustrate the answer with sketches wherever required.  
  (7) Answer to the questions should be grouped and written together  
  (8) Use Blue/Black ball ink pen to write answers. Use of pencil should be done only to draw sketches and graphs.  
       
1. (a) Assume that a complex multiplier takes 1 micro sec to perform one multiplication and that the amount of time to compute a DFT is determined by the amount of time to perform all the multiplications.

  (i) How much time does it take to compute a 1024 point DFT directly?
  (ii) How much time is required is FFT is used?

05
  (b) Let h[n] be the unit impulse response of a Low Pass filter with a cutoff frequency ωc, What type of filter has a unit sample response g[n] = (-1)u h[n]. 05
  (c) A two pole low pass filter has the system function H(z) = b0/(1-pz-1)2 Determine the values of  b0 and P such that the frequency response H(ω) satisfies the condition
| H(0) | = 1 and | H(Π/4)2 | = 1/2
05
  (d) Consider filter with transfer function. Identify the type of filter and justify it.
 
  H(z) = Z-1 - a
__________________
     1 - az-1
05
       
2. (a) the unit sample response of a system is h(n)={3,2,1} use overlap-add method of linear filtering to determine output sequence for the repeating input sequence x[n] =
{2,0,-2,0,2,1,0,-2,-1,0}
10
  (b) For a given sequence x(n) = {2,0,0,1}, perform following operations:-
 
(i) Find out the 4 point DFT of x(n)
(ii) Plot x(n), its periodic extension XP(n) and XP(n-3)
(iii) Find out 4 point DFT of Xp(n-3)
(iv) Add phase angle in (i) with factor -[2Πrk/N] where N=4, r=3 k=0, 1, 2, 3
(v) Comment on the result you had in point (i) and (ii)
10
       
3. (a) The transfer function of discrete time casual system is given below:-
 
H(z) = 1-z-1
__________________
   1 - 0.2z-1 - 0.15z-2
(i) Find the difference equation
(ii) Draw cascade and parallel realization
(iii) Show pole-zero diagram and then find magnitude at ω = 0 and ω = Π
(iv) Calculate the impulse the laesponse of the system.
10
  (b) Obtain the lattice realization for the system :
 
  H(z) = 1 + 3z-1 + 3z-2 + z-3
__________________
     1+3/4z-1 + 1/2z-2 + 1/4z-3
10
       
4. (a) What is linear phase filter? What conditions are to be satisfied by the impulse response of an FIR system in order to have a linear phase? Plot and justify compulsory zero locations for symmetric even ant symmetric even and antisymmetric odd FIR filters. 10
  (b) Determine the zeros of be following FIR system and indicate whether the system is minimum phase, maximum phase, or mixed phase.
 
H1(z) = 6 + z-1 - Z-2
H2(z) = 1 - z-1 - 6z-2
H1(z) = 1 - 5/2z-1 - 3/2z-2
H1(z) = 1 + 5/3z-1 - 2/3z-2

Comment on the stability of the minimum and maximum phase system

10
     
5. (a) A digital low pass filter is required to meet the following specifications :-
 
Pass Band ripple : < 1dB
Pass Band edge : 4 KHz
Stop Band attenuation : > 40 dB
Stop Band edge : 8 KHz
Sampling rate : 24 KHz

Find order, cutoff frequency and pole locations for Butterworth filter using bilinear transformation

10
  (b) Design an FIR digital filter to approximate an ideal low-pass filter with passband gain of unity, cut-off frequency of 950 Hz and working at a sampling frequency of Fs = 5000 Hz. The length of the impulse response should be 5. Use a rectangular window. 10
       
6. (a) Explain the need of a low pass filter with a decimator and mathematically prove that
ωy = ωxD
10
  (b) Why is the direct form FIR structure for a multirate system inefficient? Explain with neat diagrams how this inefficency is overdone in implementing a decimator and an interpolator. 10
       
7. Write notes on any four of the following :- 20
  (a) DTMF detection using Goertzel algorithms  
  (b) Filter banks  
  (c) Comparison of FIR and IIR filters  
  (d) Split radix FFT  
  (e) Optimum Equiripple Linear phase FIR filter design.  

Wednesday, August 6, 2014

B.E. Electronics & Telecommunication, Wireless Networks (WN), Semester 8, May 2013.

B.E. Electronics & Telecommunication,

Wireless Networks (WN), Semester 8, May 2013.
Con. 8551–13.
GS - 3673
(REVISED COURSE)

(3 Hours)
[Total Mark: 100]
N.B. (1) Question No 1 is compulsory.

(2) Attempt any four questions out of remaining six questions.

(3) Draw neat sketches wherever required.

(4) Assume suitable data if required.

1. (a) Explain forward link features of CDMA 2000. ---- (4 Marks)

(b) Explain concept of HSDPA with respect to WCDMA. ---- (4 Marks)

(c) What is adaptive multirate coding? ----- (4 Marks)

(d) Give different WLAN topologies. ----- (4 Marks)

(e) Explain the concept of OFDM. ---- (4 Marks)

2. (a) Explain in detail components of sensor node. ---- (10 Marks)

(b) Explain in detail various IEEE 802.11 standard used in wireless Network. ---- (10 Marks)

3. (a) Difference between WCDMA and CDMA 2000. ---- (10 Marks)

(b) Calculate the downlink cell load factor and number of voice users per cell for a WCDMA system using the following data. ---- (10 Marks)

- Information Rate (Ri) = 12.2 Kbps

- Chip Rate (Rc) = 3.84 Mops

- Required Eb/Nt = 4 dB

- Average interference factor due to other cells = 0.5

- Orthogonality factor = 0.6

- Interference margin = 3 db

4. (a) Give UMTS Air – Interface specifications, also explain 3 types of channels defined in UMTS. --- (10 Marks)

(b) Explain blue tooth protocol stack. ---- (10 Marks)

5. (a) Describe forward link and reverse link physical channels for CDMA 2000. ---- (10 Marks)

(b) Explain WLAN technologies in detail. ---- (10 Marks)

6. (a) Discuss in detail WAP programming model. ---- (8 Marks)

(b) Using the following data for GSM 1800, Develop downlink and uplink budget and determine cell radium. ---- (12 Marks)

- Base station transmit power = (Pb) = 36 dBM = 4 W

- Mobile station transmit power = Pm = 24 dbm

- Base station noise figure = 5 dBs

- Mobile station (hand held unit) noise figure = 8 dBs

- Base station transmit and receive antenna gain = GA= 18 dBi

- Mobile antenna gain = 0 dBi

- Required signal to noise ratio (SNR) = 12 dB

- Transmit antenna Cable, Connector Loss = Lc = 5 dB

- BS receiver antenna cable, connector Loss (Lc = 2 dB)

- Orientation / body loss of mobile = 3 dB

- Shadow fading = 10.2 dB

- Thermal noise density = -174 dBm/Hz

- Antenna diversity gain at Bs = 5 dB

7. Write short notes on: --- (20 Marks)

(a) Wimax

(b) Zigbee Protocol.

Monday, August 4, 2014

OPTICAL FIBRE COMMUNICATION (OFC) MAY 2013 ELECTRONICS AND TELECOMMUNICATION SEMESTER 8

OPTICAL FIBRE COMMUNICATION (OFC) MAY 2013 ELECTRONICS AND TELECOMMUNICATION SEMESTER 8

Con. 8209-13.                             (REVISED COURSE)                                      GS-3268
                                                          (3 Hours)                                          [Total Marks : 100]

N.B. : (1) Question No. 1 is Compulsory.
          (2) Attempt any four questions out of remaining six questions.
          (3) Assume suitable data wherever necessary.

1. (a)Discuss the basic block diagram of optical communication system.5
    (b)Draw the refractive index profile for the step index and graded index fiber. For5
each type give typical core and cladding diameters.
    (c)Differentiate between spontaneous and stimulated emissions.5
    (d)Derive expression for the responsivity of an intrinsic photodetector in terms of5
quantum efficiency and wavelength.

2. (a)

Draw refractive index profile of a graded index fiber and show with neat diagram

10
transmission of light through this fiber. Explain how GRIN fiber has transmission
bit rate much higher than multimode step index fiber.
    (b)Find the core radius necassary for single mode operation at 820nm of stop index10
fiber with n1=1.482 and n2= 1.474. What is the numerical aperture and maximum
acceptance angle of this fiber ? Calculate the corresponding solid angle.

3. (a)

List the importance factor responsible for power loss in optical fiber. Explain each

10
factor briefly.
    (b)Explain interamodal and intermodal dispersion. How does despersion affect the10
transmission bandwidth of optical fibers.

4. (a)

What is the basic principle on which optical sources work ? With the help of a

10
LED structure explain its working.
    (b)Draw the structure of Avalanche Photo Diode (ADP) along with the electric field10
profile that exist in the various regions of ADP structure. Explain the working.

5. (a)

Explain modified chemical vapour deposition (MVCD) method of fiber fabrication

10
in detail.
    (b)Discuss a popular non-destructive technique for attenuation measurement.10

6. (a)

Describe two methods of splicing individual fibers together. What are the

10
advantage and disadvantage of each method.
    (b)What are the desirable requirement of a good fiber optic connector ? What are10
the lensing schemes for coupling improvement ?

7.

Write short notes on any two :-

20
(a) OTDR
(b) Link Power Budget
(c) Coherent and Concoherent optical transmission.

Thursday, July 31, 2014

COMPUTER COMMUNICATION NETWORKS (CCN), B.E. Electronics & Telecommunication, Semester 7, May 2013.

COMPUTER COMMUNICATION NETWORKS (CCN),

B.E. Electronics & Telecommunication,

Semester 7, May 2013.
Con. 9370-13.
GS- 5788
(REVISED COURSE)

(3 Hours)
[Total Mark: 100]
N.B. (1) Question No 1 is compulsory.

(2) Attempt any four questions out of remaining six questions.

(3) Illustrate answers with sketches wherever required.

(4) Figures to the right indicate marks.

1. (a) Explain the difference between a connection oriented and connection less service. --- (5 Marks)

(b) What is data transparency? Explain bit stuffing and destuffing. ---- (5 Marks)

(c) What is collision and broadcast domain? How can they be reduced ? ---- (5 Marks)

(d) Explain ALOHA and Slotted ALOHA. ---- (5 Marks)

2. (a) What does the term error control mean in data link layer? Explain Go back N and selective repeat ARQ protocols. ---- (10 Marks)

(b) Explain count to infinity problem with an example and a method to avoid this Problem. ---- (10 Marks)

3. (a) Compare circuit switching, packet switching and message switching in detail. ---- (10 Marks)

(b) Explain TCP header in detail. ---- (10 Marks)

4. (a) Explain in detail repeaters, hub, bridges, routers, gateway and switches. ----(10 Marks)

(b) What is exterior and interior routing? Explain in brief distance vector routing and Link state routing. ---- (10 Marks)

5. (a) Explain HDLC frame formate. Describe configuration and response modes supported by HDLC protocol. ----- (10 Marks)

(b) Explain looping problem in bridge LAN with appropriate example. How to solve it. ---- (10 Marks)

6. (a) Write a note on IEEE 802.3 standard in detail. ----- (10 Marks)

(b) Find the shortest path between the source nodes 1 to all other nodes for the network given below using Dijkstra’s algorithm. Also draw the shortest path tree from node 1 to all other nodes. ---- (10 Marks)
7. Write short notes on any two: ---- (20 Marks)

(i) M/M/I model

(ii) ARP and RARP

(iii) ICMP

DATA COMPRESSION AND ENCRYPTION (DCE) May 2013 [ELECTIVE] ELECTRONICS AND TELECOMMUNICATION SEMESTER 7

DATA COMPRESSION AND ENCRYPTION (DCE) DECEMBER 2013 [ELECTIVE] ELECTRONICS AND TELECOMMUNICATION SEMESTER 7

Con. 9865-13.                                                                                                   GS-6238
                                                   (3 Hours)                                                  [Total Marks : 100]

  
N.B. : (1) Question No. 1 is Compulsory.
          (2) Attempt any four questions out of remaining six questions.
          (3) Assume suitable data wherever required.
          (4) Figures to be right indicates full marks.
          (5) Answers to the question should be grouped and written together.

1. (a)What are the different measures of performance of data compression techniques ?5
    (b)Discuss the applicaltion of JPEG 2000.5
    (c)Compare public and private key crypto-system.5
    (d)What is secure electronic payment system ?5

2. (a)

A source and its letter form an alphabet A = {a, b, c, d, e} with probabilities

10
P = {0.15, 0.05, 0.25, 0.35, 0.2} respectively. Calculate :-
      (i) Standard Huffman code
     (ii) Minimum variance Huffman code
     (iii) Average length and redundancy of both codes
     (iv) Draw the binary code tree for both the codes.
    (b)Explain the working of DES with block diagram.10

3. (a)

What are dictionary based compression schemes? Explain LZ77 with suitable examples.

10
    (b)What are various aspects of conventional encryption ? Discuss the types of attacks.10

4. (a)

How are differential encoding schemes used in audio compression ?

10
    (b)Explain Chinese remainder theorem with an example.10

5. (a)

Describe various approaches for Image Compression and discuss one of them in

10
detail.
    (b)Explain Hash and MAC algorithm used for authenication.10

6. (a)

Describe the features of Video Compression as compared to Image Compression.

10
Explain MPEG industry standard for video compression.
    (b)Explain Digital Immune System.10

7.

Write short notes on any two :-

20
       (a) Firewall design
       (b) Elliptic curve cryptography
       (c) MPEG audio standard
       (d) Two dimensional image transform.

Tuesday, July 29, 2014

MICROPROCESSORS AND MICROCONTROLLERS - 2 (MPMC) MAY 2013 [EXTC] ELECTRONICS AND TELECOMMUNICATION SEMESTER 6

MICROPROCESSORS AND MICROCONTROLLERS - 2 (MPMC) MAY 2013  [EXTC] ELECTRONICS AND TELECOMMUNICATION SEMESTER 6

Con. 7241-13.                                                                                            GS-9789
                                                  (3 Hours)                                         [Total Marks : 100]

N. B. : (1) Question No. 1 is Compulsory.
           (2) Solve any four questions from the remaining six questions.
           (3) Figures to the right indicate full marks.
           (4) Assume suitable wherever necessary.

1. (a)Design 8086 microprocessor based system using mininimum mode following10
specifications :-
     (i) 8086 microprocessor working at 8 MHz
     (ii) 32 KB EPROM using 16 K X 8 devices
     (iii) 32 KB SRAM using 16 K X 8 devices.
Clearly show memory map address ranges. Draw a neat schematic.
    (b)What is segmented memory and what are its advantages ? Explain logical and physical.5
address in 8086.
    (c)Explain features of PIC 18F microcontroller.5

2. (a)

Draw and explain interfacing of 8086 with 8255.

10
    (b)Explain data and program memory organization of PIC 18F microprocontroller.10

3. (a)

Give flowchart and assembly language program for 8086 to substract two 4 digit

10
BCD numbers.
    (b)Explain the following instructions of PIC 18F microcontroller :-10
       (i) DAW
      (ii) MOVLB 0 X 06
     (iii) TBLRD*+
     (iv) SLEEP

4. (a)

Explain interrupt structure of 8086.

10
    (b)Explain addressing modes of PIC 18F microcontroller.10

5. (a)

Interface 8259A to 8086 and write initialization instructions for 8259A to meet

10
the following specifications :-
       (i) Edge triggered, single
      (ii) Mask interrupts IR1 and IR4
      (iii) Interrupt vector type for IRO is 60H.
    (b)List and explain stack related and processor control instructions of 8086.10

6. (a)

Explain 8086 maximum mode of operation in detail.

10
    (b)Write assembly language program for PIC 18F microcontroller to evaluate the10
following expression.
Y = P X Q + R X S
where p, Q, R and S are 8 bit numbers, which are located at memory locations
0 X 20 to 0 X 23. Store the result Y in memory locations 0 X 24 to 0 X 26.

7.

Write short notes on any four of the following:-

20
       (a) PIC 18F pipelining
       (b) PIC 18F STATUS register
       (c) Memory banking in 8086
       (d) PIC 18F microcontroller REST.
       (e) Advantages of memory segmentation.

Monday, July 28, 2014

Microprocessors and Microcontollers - 1 (MPMC) Semester 5 (3 Hours) May 2013

Microprocessors and Microcontoll
Microprocessors and Microcontollers - 1 (MPMC)
Semester 5
(3 Hours) May 2013

 
GS-8901
[Total Marks : 100]
       
N.B. : (1) Question No. 1 is compulsory.  
  (2) Solve any four questions out of remaining six questions.  
       
1. (a) Explain difference between microprocessor and microcontroller. 05
  (b) Interface 32KB SRAM using 8 K x 8 devices and 64KB EPROM using 16K x 8 devices for 8085 based microprocessor system. 15
       
2. (a) Draw and explain architecture of 8085 microprocessor. 10
  (b) Write a program for 8085 microprocessor to exchange memory block. 10
       
3. (a) Draw and explain interrupt acknowledge machine cycle for 8085 microprocessor. 10
  (b) Explain bit level instruction for 8051 microcpntroller. 10
       
4. (a) Explain ICW and OCW of 8259 PIC. 10
  (b) Explain serial data transfer modes for 8051 microcontroller. 10
     
5. (a) Explain internal memory organization of 8051 microcontroller. 10
  (b) Write assembly level program for 8051 microcontroller to generate 1 KHz square wave on P 1.1. Assembly crystal frequencies 12MHz. 10
       
6. (a) Draw and explain interrupt structure8085 microprocessor. 10
  (b) Explain following instruction of ARM :
     (i) ADD R0, R1, R2
     (ii) SBC R0, R1, R2
     (iii) CMP R0, R1,
     (iv) MUL R3, R2,R1
     (v) MLA R4, R3,R7, R8
10
       
7. (a) Explain control word of 8253 Timer. 05
  (b) Compare features of 89C51, 89C52, 89C2051, 89C2052. 10
  (c) Draw and explain interfacing of stepper with 8051 microcontroller. 05

Friday, July 25, 2014

COMPUTER VISION (CV) [ELECTIVE], Semester 8, B.E. Computer Science (CS), May 2013.

COMPUTER VISION (CV) [ELECTIVE], Semester 8,

B.E. Computer Science (CS), May 2013.
Con. 8527-13
GS-3577
(3 Hours)
[Total Mark: 100]

N.B. (1) Question No 1 is compulsory.

(2) Attempt any four questions out of remaining six questions.

(3) Assume suitable data whenever necessary and justify the same.

(4) Figures to the right indicate full marks.

1. (a) Give all the steps involved in recognition methodology and briefly explain each. ---- (10 Marks)

(b) Explain ‘opening’ and ‘closing’ with example. ---- (10 Marks)

2. (a) Explain Hough transform with example. Mention all its merits and demerits. ---- (10 Marks)

(b) What is knowledge based vision? Explain different of knowledge representation used in computer vision. ---- (10 Marks)

3. (a) Explain Border tracking algorithm with suitable example. ---- (10 Marks)

(b) Explain inverse perspective projection. ---- (10 Marks)

4. (a) Explain intensity matching of 1 dimensional signals. ---- (10 Marks)

(b) Explain back – tracking algorithm with suitable example. ---- (10 Marks)

5. (a) Apply ‘iterative’ and ‘classical’ connected component labelling algorithms on following image: ---- (10 Marks)

0 0 0 0 0 0 0 1 1 0
0 1 1 0 0 0 1 1 1 0
0 1 1 1 0 1 1 1 1 0
0 0 1 1 0 0 0 1 1 0

(b)
Explain boundary descriptors. --- (10 Marks)

6. (a) Explain ‘thinning’ and ‘thickening’ with the help of examples. ---- (10 Marks)

(b) Explain mixed spatial gray – level moments. ---- (10 Marks)

7. Write short note on: ---

(a) External points. ---- (5 Marks)

(b) Principal component analysis. --- (5 Marks)

(c) View class matching. ---- (5 Marks)

(d) Global V/S local features. --- (5 Marks)

Wednesday, July 23, 2014

SOFTWARE ARCHITECTURE(SA) COMPUTER SCIENCE MAY 2013 SEMESTER 8

SOFTWARE ARCHITECTURE(SA) COMPUTER SCIENCE MAY 2013 SEMESTER 8  

Con. 7478-13.                   (REVISED COURSE)                                                GS-2974
                                                (3 Hours)                                                 [Total Marks : 100]

N.B. : (1) Question No. 1 is compulsory.
          (2) Attempt any four from remaining six questions.
          (3) Assume suitable data wherever necessary.

1. (a)What do you mean by architecitural degradation ? Explain architecitural drift and4
erosion.
    (b)Define product Line architecture4
    (c)Why system based analysis important, if you have already completed component4
and component level analysis ?
    (d)What is a reference architecture ? How does it differ from an ordinary Software4
Architecture ?
    (e)What is a difference between view and viewpoint ?4

2. (a)

What are different criterias for evaluting implementation framework ?

8
    (b)Explain REST with a diagram.8
    (c)Differentiate Software Architecture and Design.4

3. (a)

Define following terms:-

6
    (i) Component
    (ii) Connector
    (iii) Configuration.
    (b)Explain 4 + 1 view in UML.5
    (c)What do you mean by stakeholder driven modeling.5
    (d)Differentiate accuracy and precesion.4

4.

A Lunar Lander game is to be developed with following specifiaction :-

20
User input - It takes input pilot as increase/decrease speed which is directly
                    mapped to reqiured burn rate.
Other input - Lunar Lander has two sensor
                      (i) Current Burn Rate
                      (ii) Current altitude.
Output - Based on this 3 input determine new burn rate and set different
               parameter like altitude, velocity etc. and display them.
Draw an architecture using any of two styles :-
        (a) Object Oriented Style
        (b) Role Based Style
        (c) Black Board Style.

5. (a)

Explain with example software system mobitity and architecture.

10
    (b)Explain any two connectors in details:-10
     (i) Data access connector
     (ii) Stream connector
     (iii) Procedure call connector.

6. (a)

What is SOA and web services.

10
    (b)What is an architecture implementation framework ? How does an architecture5
implementation framework differ from middleware?
    (c)What domain specific S.A ?5

7. (a)

What is C2 Style Architecture ?

6
    (b)Design issues for non functional properties - Scalablity and Hetrogeneity.6
    (c)Explain distributed object style in connection with CORBA architecture .8

Advanced Internet Technology (AIT) [Elective] Semester 8 (3 Hours) May 2013

Advanced Internet Technology
Advanced Internet Technology (AIT) [Elective]
Semester 8
(3 Hours) May 2013

 
GS-3583
[Total Marks : 100]
 
N.B: (1) Question no 1 is compulsory.  
  (2) Attempt any question out of remaining six questions.  
       
1. (a) State and explain ports, commands and communication steps in FTP. 10
  (b) Describe virtual private Network and state is usefulness in various industries. 10
       
2. (a) Compare and explain SOA and ROA in detail. 10
  (b) Discuss the security issues in cloud. 10
       
3. (a) Explain the REST architecture and gives its design constraints. 10
  (b) Explain the concept of hierarchical routing with an example. 10
       
4. (a) Explain public key infrastructure and secure payment mechanism in detail. 10
  (b) Explain the concept of DNS and DNS head format. 10
     
5. (a) Explain the working of peer to peer over internet with example. 10
  (b) Explain IPv6 and its advantages. 10
       
6. (a) Hoe does DHCP work? Explain its packet fromat. 10
  (b) How Google App Engine works? Explain in brief. 10
       
7. write a short notes on any four of the following :- 20
  (a) RSS  
  (b) VOIP  
  (c) HTML 5.0  
  (d) Data base vulnerabilities  
  (e) AJAX.  

Friday, July 18, 2014

SOFT COMPUTING (SC) [ELECTIVE], Semester 7, B.E. Computer Science (CS), May 2013.

SOFT COMPUTING (SC) [ELECTIVE], Semester 7,

B.E. Computer Science (CS), May 2013.
Con.9787-13
(REVISED COURSE)
GS- 6157
(3 Hours)
[Total Mark: 100]
N. B.: (1) Question no 1 is compulsory.

(2) Attempt any four questions out of the remaining questions.

(3) Figures to the right indicate full marks.

1. (a) Explain cylindrical extension and projection operations on fuzzy relation with example. ---- (5 Marks)

(b) A neuron with 3 inputs has the weight vector w = [0.1 0.3 -0.2]. The activation function is binary sigmoidal activation function. If input vector is [0.8 0.6 0.4] then find the output of neuron. --- (5 Marks)

(c) What are the various types of Mutation techniques? ---- (5 Marks)

(d) Model the following as fuzzy set using trapezoidal membership function. --- (5 Marks)
“Middle age”

2.(a) What is supervised and unsupervised learning ? Compare different learning rules. ---- (10 Marks)

(b) Explain the Radial Basis function neural network for the solution of XOR. --- (10 Marks)

3. (a) Explain Kohonen’s self organizing neural network. --- (10 Marks)

(b) For the given membership function as shown in figure below, determine the defuzzified output value by 2 methods.---- (10 Marks)
4. (a) Explain the operations of genetic programming with help of flowchart . ---- (10 Marks)

(b) Compare Mamdani and Sugeno Fuzzy models. ---- (10 Marks)

5. Design fuzzy logic controller for water purification plant. Assume the grade of water and temperature of waters as the inputs and the required amount of purifier as the output. Use three descriptor for input and output variables. Derive set of rules for control the action and defuzzification. The design should be supported by figures. Clearly indicate that if water temperature is low and grade of water is low, then amount of purifier required is large. ---- (20 Marks)

6. (a) Explain Travelling salesperson problem using simulated Annealing. --- (10 Marks)

(b) Explain Error back propagation training Algorithm (EBPTA). ---- (10 Marks)

7. Write short notes on any two: --- (20 Marks)

(a) Character recognition using neural network

(b) Learning vector quantization

(c) Derivative based optimization.

Thursday, July 17, 2014

HUMAN COMPUTING INTERACTION (HCI) [ELECTIVE] MAY 2013 COMPUTER SCIENCE SEMESTER 8

HUMAN COMPUTING INTERACTION (HCI) [ELECTIVE] MAY 2013 COMPUTER SCIENCE SEMESTER 8

Con. 8532-13.                          (REVISED COURSE)                                            GS-3565
                                                       (3 Hours)                                             [Total Marks : 100]
N.B. (1) Question No. 1 is compulsory, solve any four questions from remaining questions.
        (2) All questions carry equal marks.
        (3) Specify your answers with neat diagrams and examples wherever necessary.

1. (a)Explain various human characteristics which are considered while designing the10
user interface.
    (b)How text messages are important to communicate with user, explain with few10
examples.

2. (a)

What are general principles of user interface design ?

10
    (b)Design a user interface for Automated Ticket Bending machine for State Road10
Transport Service, consider all necessary elements in your design.

3. (a)

Explain screen based and device base control mechanism in detail.

10
    (b)How ordering of screen data necessary in user interface design ? Explain.10

4. (a)

What are various tools in building Graphical user interface ?

10
    (b)Explain different types of windows.10

5. (a)

What is visually pleasing composition for user interface ?

10
    (b)Specify User Interface for any two home appliances in detail10

6. (a)

Write a brief note on information retrieval for web applications.

10
    (b)What is use, usage and usability of interface system ?10

7.

Write short notes on following :-

20
      (a) Spech recognition
      (b) Statistical Graphics
      (c) Interaction Devices
      (d) Importance of good design.

Multimedia System Design (MSD) Semester 8 (Revised Coures) (3 Hours) May 2013

Multimedia System Design
Multimedia System Design (MSD)
Semester 8 (Revised Coures)
(3 Hours) May 2013

 
GS-3196
[ Total Marks : 100 ]
N.B: (1) Question no 1 is compulsory.  
  (2) Solve any four questions from the remaining six questions.  
  (3) Assume suitable data wherever required.  
       
1. (a) What are the different types of workflow? Suggest application of mail enabled workflow. 10
  (b) You are appointed as a Consultant to set up a multimedia laboratory in an Engineering institute. Give Specification of components, Configuration, connectivity, software etc. along with assumptions. 10
       
2. (a) Explain the printout technology. Hence explain the working of a Laser printer. 10
  (b) Explain JPEG Compression in detail. 10
       
3. (a) Explain level O through level five of RAID functionality. 10
  (b) Explain WAVE file format. 10
       
4. (a) Explain working of scanner and hence explain reasons for use of CCD by these scanner. 10
  (b) Describe the algorithm for CCITT Group 3 standard. How does CCITT Group differ from CCITT Group 3? 10
     
5. (a) Explain Authoring system and also explain different types of authoring. 10
  (b) What are the components of Distributed multimedia system? 10
       
6. (a) Explain ADPCM in speech coding scheme.10
  (b) Explain MPEG-1 compression in detail. 10
       
7. write short notes on follwoing any two  :- 20
  (a) Knowledge based multimedia system.  
  (b) MIDI communication protocol  
  (c) Video conferencing : Design issues.  

Friday, July 11, 2014

SYSTEM SECURITY(SS) MAY 2013 COMPUTER SCIENCE SEMESTER 7

SYSTEM SECURITY(SS) MAY 2013 COMPUTER SCIENCE SEMESTER 7 

Con.9376-13.                     (REVISED COURSE)                                                 GS-5752
                                                    (3 Hours)                                                 [Total Marks : 100]

N.B : (1) Question No. 1 is compulsory.
         (2) Attempt any four questions from the remaining six questions.
         (3) Assume suitable data if required.

1. (a)Explain different Birthday problems.5
    (b)What are the key principles of security ?5
    (c)Compare and contrast SHA-T and MD-55
    (d)Explain the Honey Pots.5

2. (a)

How flaw in TCP/IP can cause operating systems to become Vulnerable ? Also Explain

10
how Kerberos are used for user authentication in windows.
    (b)For the given values p = 19, q = 23 and e = 3 find n, ф(n) and d using RSA algorithm.10

3. (a)

What is Buffer overflow and Incomplete mediation in Software Security ?

10
    (b)Explain one-time initialization process and processes in each round of Advanced.10

4. (a)

What is a denial of service attack ? What are the way in which an attacker can mount

10
a DOS attack on the system ?
    (b)Compare Packet Sniffing and Packet Spoofing. Explain the session hijacking attack.10

5. (a)

Explain Multiple level Security Model. Also explain Multilateral security.

10
    (b)What is Malware ? Explain Salami and Linearization attacks.10

6. (a)

Explain software Reverse Engineering. Also Explain Digital Rights Management.

10
    (b)Describe the different types of IDS and their limitations.10

7.

Write short notes on (any four) :-

20
       (a) CAPTCHA
       (b) Access Control Matrix
       (c) Covert Channel
       (d) Firewall
       (e) RC4.

Monday, July 7, 2014

Digital Signal and Image Processing (DSIP) Semester 7 (3 Hours) May 2013

Digital Signal and Image Process
Digital Signal and Image Processing (DSIP)
Semester 7
(3 Hours) May 201
3
 
GS-5302
[Total Marks : 100]
 
N.B: (1) Question no 1 is compulsory.  
  (2) Attempt any four question out of remaining six questions.  
  (3) Assume suitable data wherever necessary.  
       
1. (a) Explain Single and systems with the help of suitable examples. Give applications of signals and systems. 05
  (b) Find Z transform of the following finite duration signal and state its ROC :-
     X(n) = {1, 2, 5, 7, 0, 1}
05
  (c) Given X(n) = {0, 1, 2, 3}. Find X(k) using DIT - FFT Algorithm. 05
  (d) Find CONVOLUTION of following signals :-
     X(n) = {2, 1, 3, 5} and h(n) = {0, 1, 2, 4}.
05
       
2. (a) Determine the system function and unit sample response of the system given by Difference equation :

     Y(n) = 1/2 Y(n-1) + 2 X(n)

10
  (b) Perform Histogram Equalization for the following. Obtain a plot of original as well as Equalized Histogram.
 
Grey Level 0 1 2 3 4 5 6 7
No. of pixels 100 90 50 20 0 0 0 0
10
       
3. (a) Given X(n) = {0, 1, 2, 3, 4, 5, 6, 7}. Find X(k) usin DIT-FFT algorithm. 10
  (b) Compute 2D DFT of given Image using DIT-FFT algorithm.
 
f(x,y) = [

1 2 3 2
4 3 2 1
4 3 2 4
3 2 1 4

]
10
       
4. (a) Explain in details Enhancement techniques in spatial domain used for images. 10
  (b) What is HADAMARD Transform? Write a 4 x 4 Hadamard matrix and its applications. 10
     
5. (a) What is segmentation? Explain the different methods of image segmentation. 10
  (b) Explain image Restoration and its applications. 10
       
6. (a) What do you understand by sampling and quantization with respect to Digital image Processing? How will you convert an Analog image into a Digital image? 10
  (b) Name and explain different types of Data Redundancies associated with Digital image. 10
       
7. write short notes on (any two) :- 20
  (a) Wavelet Transform  
  (b) properties of Fourier Transform  
  (c) KL Transform  
  (d) Discrete Cosine Transform.  

ROBOTICS AND ARTIFICIAL INTELLIGENCE (RAI), B.E. Computer Science (CS), Semester 7, May 2013.

ROBOTICS AND ARTIFICIAL INTELLIGENCE (RAI),

B.E. Computer Science (CS), Semester 7, May 2013.
Con.8341-13
GS- 5419
(3 Hours)
[Total Mark: 100]

N. B.: (1) Question no 1 is compulsory.

(2) Answer any four questions out of the remaining six questions.

(3) Assume suitable data wherever necessary.

1. (a) Find the inverse kinematic solution of 4-axis SCARA Robot. --- (10 Marks)

(b) Explain utility based agent with the help of neat diagram. --- (10 Marks)

2. (a) Write a note on Reactive Behavioural System. ---- (10 Marks)

(b) Describe the following sensors---- (10 Marks)

(i) Sonar

(ii) Infrared

3. (a) Compare different uninformed search strategies. --- (10 Marks)

(b) Explain A* Algorithm. What is the drawback of A* ? Also shows that A* is optimally efficient. --- (10 Marks)

4. (a) Describe Hill Climbling Algorithm. What are it’s limitations? ---- (10 Marks)

(b) Explain various method of knowledge representation with example. ---- (10 Marks)

5. (a) Define Reach and stroke, Degree of Freedom and Accuracy. --- (10 Marks)

(b) Define partial order planner. Explain STRIPS representation of planning problem. --- (10 Marks)

6. (a) Explain the learning Agent with the help of suitable diagram. --- (10 Marks)

(b) What are PEAS descriptors? Give PEAS descriptor for ---- (10 Marks)

(i) part-picking robot.

(ii) WUMPUS WORLD.

7. Write short note on following: --- (20 Marks)

(a) Belietf Network

(b) PROLOG

(c) Crypt Arithmetic

(d) GPS

MOBILE COMPUTING (MC) MAY 2013 COMPUTER SCIENCE SEMESTER 7

MOBILE COMPUTING (MC) MAY 2013 COMPUTER SCIENCE SEMESTER 7 

Con. 8890-13.                     (REVISED COURSE)                                                GS-5539
                                                   (3 Hours)                                                [Total Marks : 100]

N.B. : (1) Question No. 1 is compulsory.
          (2) Attempt any four questions out of remaining six questions.
          (3) Assume suitable data wherever necessary.

1. (a)What do you mean by Near and far terminals problem ?5
    (b)Explain VOIP service for Mobile Networks.5
    (c)What is the use of HLR & VLR registers in Mobile computing ?5
    (d)Explain different types of Spread Spectrum technique used in cellular system.5

2. (a)

Draw a neat diagram of GPRS system architecture and explain with different types

10
of interfaces.
    (b)Explain protocol architecture of 802.11.10

3. (a)

Explain I-TCP and M-TCP in detail.

10
    (b)Explain wireless datagram protocol.10

4. (a)

Explain various protocols of MAGNET Routing protocols.

10
    (b)Describe the Mobile satelite system (LEO & GEO).10

5. (a)

Explain handoff. Management technique used in cellular system.

10
    (b)Explain Motivation of WATM also explain WATM generic reference Model ?10

6. (a)

Explain UTRA FDD TDD mode in detail ?

10
    (b)Compare 802.11 and 802.15.10

7.

Write short note on any four :-

20
      (a) RFID
      (b) M-commerce
      (c) Wireless Sensor Network
      (d) H.323 Network
      (e) WML Script.