|
Software Testing and Quality Assurance
(STQA)
Semester 7 (Revised Course) (3 Hours) December 2013 |
|||
|
LJ-14091
[Total Marks : 100] |
|||
| N.B: | (1) | Question No. 1 is compulsory. | |
| (2) | All questions carry equal marks. | ||
| 1. | (a) | Explain difference between Validation and Verification. | 08 |
| (b) | Explain difference between failure, error and fault. | 06 | |
| (c) | Explain the concept of Mutation testing. What are the assumptions made in Mutation testing? | 06 | |
| 2. | (a) | What are the limitations of control-flow based testing? | 05 |
| (b) | Compare CFG and DFG. | 07 | |
| (c) | What is data flow anomaly? Explain why the presence of data flow anomaly does not imply that program execution will produce incorrect results. | 08 | |
| 3. | (a) | Describe the circumstances under which you would apply white box testing, black box testing, or both the techniques to evaluate COTs components. | 10 |
| (b) | Why should integration testing be performed? What types of errors can this testing will reveal? What is the difference between Unit testing and integration testing? | 10 | |
| 4. | (a) | What are zero day attack? Discuss it's significance with respect to security testing. | 06 |
| (b) | For each of the following situation justify whether it
is hazard or mishap :-- (i) Water in the swimming pool becomes electrified. (ii) A car stops abruptly. (iii) A long distance telephone company suffers an outage. (iv) A nuclear weapon is destroyed in an unplanned manner. (v) A room fills with carbon di-oxide. |
10 | |
| (c) | Explain clearly the difference between Load testing and Stress testing. | 04 | |
| 5. | (a) | What are the advantages and disadvantages of random testing? | 06 |
| (b) | What is test oracle? What are the difference between a parametric oracle and statistical oracle. | 10 | |
| (c) | Discuss the similarity between decision table used and category partition based testing methodology. | 06 | |
| 6. | (a) | What are the essential items a system test plan should include? | 10 |
| (b) | What are the components of test automation infrastructure ? | 10 | |
| 7. | Write short notes on (any four) :- | 20 | |
| (a) | Metrics for monitoring test execution. | ||
| (b) | Difference between UAT and BAT. | ||
| (c) | Importance of DOS attack in acceptance testing. | ||
| (d) | Five different views of software quality. | ||
| (e) | McCall's quality factors and quality criteria. | ||
Saturday, May 10, 2014
Software Testing and Quality Assurance (STQA) Semester 7 (Revised Course) (3 Hours) December 2013
Software Testing and Quality Assurance (STQA) Semester 7 (Revised Course) (3 Hours) May 2013
|
Software Testing and Quality Assurance
(STQA) |
|||
|
GS-5464 |
|||
| N.B: | (1) | Question No. 1 is compulsory. | |
| (2) | Attempt any four questions out of remaining six questions. | ||
| 1. | (a) | What is acceptance testing? Explain acceptance testing criteria and acceptance test plan. | 10 |
| (b) | Explain McCall,s quality factors and criteria. | 10 | |
| 2. | (a) | Explain ISO 9126 quality characteristics, | 10 |
| (b) | Explain test design preparedness matrics. | 10 | |
| 3. | (a) | Explain metrics for monitoring test execution. | 10 |
| (b) | Explain evaluation and selection of test automated tools. | 10 | |
| 4. | (a) | Explain the boundary value analysis with the help of example. | 10 |
| (b) | What are the differences between performance, stress and scalability testing. | 10 | |
| 5. | (a) | What are the objectives of testing? Write the different issues of testing and write the difference between validation and verification. | 10 |
| (b) | Draw and explain control flow graph for binary search function. | 10 | |
| 6. | (a) | What is the difference between static unit testing and dynamic unit testing? Explain static unit testing with the help of example. | 10 |
| (b) | What is data flow testing? Explain feasible paths and test selection criteria in data flow testing. | 10 | |
| 7. | (a) | What is system integration testing? Explain test plan for system integration testing. | 10 |
| (b) | Describe the difference between black box and white box testing. | 10 | |
Friday, May 9, 2014
Software Testing and Quality Assurance (STQA) Semester 7 (Revised Course) (3 Hours) December 2012
|
Software Testing and Quality Assurance
(STQA) |
|||
|
KR-1206 |
|||
| N.B: | (1) | Question No. 1 is compulsory. | |
| (2) | All questions carry equal marks. | ||
| (3) | In all solve five questions. | ||
| 1. | (a) | What is the difference between stress performance and scalability testing? What is the difference between load testing and stress testing? | 10 |
| (b) | What is the difference between validation testing and verification testing? | 05 | |
| (c) | Explain the difference between failure, fault and error. | 05 | |
| 2. | (a) | Explain with suitable example the concepts of mutation testing, mutant, mutation score, killable mutant and staburn mutant. What do you mean by equivalent mutant? | 10 |
| (b) | The binary search routine in shown in the following
program. Introduce two faults in this routine so that these go
undetected by your test cases designed for the complete branch
coverage, in CFG. in binarysearch (int x, int V[ ], int n) { int low, high, mid; low = 0; high = n-1; while (low < = high)/2 if (x < V [mid] high = mid -1; else if (x > V[mid]) low = mid + 1; else return mid; } return - 1; }. |
10 | |
| 3. | (a) | Explain with suitable example the difference between 'Data Flow graph' and 'Control Flow Graph'. | 10 |
| (b) | What is 'Data Flow Anomaly'? Explain with respected to state transition diagram of a program variable. | 10 | |
| 4. | (a) | Describe difference between Black Box Testing and white Box Testing. | 08 |
| (b) | Describe the difference between unit testing and integration testing. | 06 | |
| (c) | Discuss the advantages and disadvantages of top-down and bottom-up integration approaches, to integration testing. | 06 | |
| 5. | (a) | What is test Oracle? What are the differences between parametric oracle and statistical oracle? | 10 |
| (b) | Draw and explain state transition diagram of a test case. | 10 | |
| 6. | (a) | Explain broad criteria of test automation tool evaluation. | 10 |
| (b) | What are the objectives of acceptance testing? What is the difference between UAT and BAT? | 10 | |
| 7. | Write short notes (Any two) | 20 | |
| (a) | Application of ISO 9000 framework to an educational institute. | ||
| (b) | Defect life cycle. | ||
| (c) | System testing categories. | ||
| (d) | Interface errors in integration testing. | ||
Software Testing and Quality Assurance (STQA) Semester 7 (Revised Course) (3 Hours) May 2012
|
Software Testing and Quality Assurance
(STQA) |
|||
|
GN-6425 |
|||
| N.B: | (1) | Question No. 1 is compulsory. | |
| (2) | Answer any four questions out of remaining six questions. | ||
| 1. | (A) | Who should define the acceptance quality attribute criteria of a test project? Justify your answer and give some Acceptance criteria. | 05 |
| (B) | Compare McCall's quality model with ISO 9126 quality model. | 05 | |
| (C) | Explain test case Design effectiveness. | 05 | |
| (D) | Explain different types of interface errors. | 05 | |
| 2. | (A) | Draw data flow graph for below given
routine. */ pow(m,n) computes m to the power of n */ void pow(int m,n) { float q; int p; if(n<0) p=0-n; else p=n; q=1.0; while(p !=0) { q=q*m; p=p-1; } if(n<0) q=1.0/q print("%f",q) } |
10 |
| (b) | Explain Dynamic unit testing. | 10 | |
| 3. | (a) | Briefly explain McCall's Quality Factors and criteria. | 10 |
| (b) | What are the objectives of Acceptance Testing? Explain different types of Acceptance Testing. | 10 | |
| 4. | (a) | Explain in detail Evaluation and Selection of Test Automation Tools. | 10 |
| (b) | Explain different metrics used in system testing. | 10 | |
| 5. | (a) | Explain boundary value analysis with the help of suitable example. | 10 |
| (b) | Discuss the advantages and disadvantages of integration testing. | 05 | |
| (c) | Explain scalability testing with example. | 05 | |
| 6. | (a) | Explain the following terms. a) Verification b) Validation c) Error d) fault e) Defect |
10 |
| (b) | Draw the Control Flow Graph and Show coverage criteria
for given code. Public static double ReturnAverage(int value[ ], int AS, int MIN, int MAX) { int i, ti, tv, sum; double av; i=0; ti=0; tv=0; sum=0; while(ti<AS&& value [i] !=.999) { ti**; if(value [i] >=MIN&& value[i] <=MAX) { tv++; sum=sum+value[i]; ; i++; } if(tv>0) av = (double) sum/tv, else av = (double)-999; return(av); } |
10 | |
| 7. | (a) | Explain test design preparedness matrix. | 05 |
| (b) | Differentiate Black Box and White Box Testing. | 05 | |
| (c) | Explain load testing and stress testing. | 05 | |
| (d) | Explain different views of software quality. | 05 | |
Thursday, May 8, 2014
Software Testing and Quality Assurance (STQA) Semester 7 (Revised Course) (3 Hours) December 2011
|
Software Testing and Quality Assurance
(STQA) |
|||
|
MP-5758 |
|||
| N.B: | (1) | Question No. 1 is compulsory. | |
| (2) | Answer any four questions out of remaining six questions. | ||
| 1. | (A) | Draw the data flow of following code. public static double ReturnAverage(int ValueΓ, int AS, int MIN, int MAX){ int i, ti, tv, sum; double av; i=0; ti = 0; sum = 0; while (ti < AS && value [i] ! = -999){ ti++; if (value[i] <=MAX){ tv++; sum=sum+value[i]; } i++; } if(tv>0) av = (double)sum/tv; else av = (double) - 999; return (av); } |
10 |
| (B) | Explain dynamic unit testing. | 10 | |
| 2. | (A) | Draw the control flow graph of Q1. a)code. And show branch coverage criteria. | 10 |
| (b) | Explain the following terms. i) Verification ii) validation iii) error iv) fault v) defect. |
10 | |
| 3. | (a) | Describe the difference between black box and white box testing with the help of example. | 10 |
| (b) | Explain the characteristic of automated test cases. | 10 | |
| 4. | (a) | Explain McCall's quality factors and criteria. | 10 |
| (b) | Explain boundary value analysis with the help of example. | 10 | |
| 5. | (a) | Explain the mutation testing with the help of example . | 10 |
| (b) | What is the objectives of acceptance testing? Explain different types of acceptance testing. | 10 | |
| 6. | (a) | Describe the difference between unit testing and integration testing. | 10 |
| (b) | Explain the characteristic of testable requirments. | 10 | |
| 7. | (a) | Explain ISO 9001;2000 requirements. | 10 |
| (b) | Explain test design preparedness matrix with the help of example. | 10 | |
Software Testing and Quality Assurance (STQA) Semester 7 (Revised Course) (3 Hours) December 2010
|
Software Testing and Quality Assurance
(STQA) |
|||
|
GT-8949 |
|||
| N.B: | (1) | Question No. 1 is compulsory. | |
| (2) | Answer any four questions out of remaining six questions. | ||
| Q1. | (5 Marks Each) | 05 | |
| (A) | Who should define the acceptance quality attribute criteria of a test project? Justify your answer and give some Acceptance criteria. | ||
| (B) | Compare McCall's quality model with ISO 9126 quality model. | ||
| (C) | How many level of test execution will you follow and describe them? | ||
| (D) | Explain test Design Preparedness Metrics | ||
| Q2. | 10 | ||
| (A) | Generate Decision Table based Test Cases for
a payroll system of a person (i) if the salary of a person is less than equal to Rs. 70,000 and expenses do not exceed Rs. 30,000 then 100% tax is charged by IT department. (ii) if the salary is grater than Rs. 60,000 and less than equal to Rs 2lakhs and expenses don't exceed Rs. 40,000 than 20% tax is charged by IT department. (iii) For salary greater than Rs 2lakhs, 5% additional charges is also charged. (iv) If expenses are greater than Rs. 40,000 surcharge is 9%. |
||
| (b) | Explain with example scalability testing? | 5 | |
| (c) | Explain test Case Design effectiveness | 5 | |
| Q3. | |||
| (a) | Acceptance test cases executed in two phases, justify? | 5 | |
| (b) | Draw data Flow Graph and write du-path for variable x
and y */ pow(x,y) this program computes x to the power of y, where x and y are integars */
|
10 | |
| (c) | A software engineering group is developing a mission-critical software system that will launch laser-guided missiles to its destinations. This is a new kind of * product that was never built by the company. As a quality assurance manager, which code review methodology--walkthrough or inspection--would you recommend? Justify your answer. | 5 | |
| Q4. | |||
| (a) | Perform Mutation testing with four mutants on given code
and find Mutation Score.
|
10 | |
| (b) | Explain different metrics used in System Testing | 10 | |
| Q5. | |||
| (a) | Draw control flow graph for given code and
show that branch coverage includes statement coverage File*fptr1,
*fptr2, *fptr3;/*These are global variables. */ |
||
| (b) | Explain Test Execution Strategy in detail. | 10 | |
| Q6. | |||
| (a) | Explain with example load testing and stress testing? | 05 | |
| (b) | Suppose that you plan to purchase commercial off-the-shelf(COTS) components and integrated them with your communication software project. What kind of acceptance criteria will you develop to conduct acceptance testing of the COTS components | 05 | |
| (c) | Generate Boundary Value Analysis Test Cases for the
Triangle Problem and write how many test cases can be generated? The triangle program accepts three integers, p, q and r as input. These are taken to be the sides of a triangle. The integars p,q and r must satisfy the following conditions C1: 1 < p < 300 C2: 1 < q < 300 C2: 1 < r < 300 C4: p <q+r C5: q <p+r C6: r <p+q The input of the program may be either of: Equilateral Triangle, Isosceles Triangle, Scalene or "Not a Triangle". |
05 | |
| Q7. | |||
| (a) | Differentiate structural and functional testing | 5 | |
| (b) | Explain the five different views of software quality | 5 | |
| (c) | Discuss the advantages and disadvantages of integration testing | 5 | |
| (d) | What are the strengths and weakness of automated testing and manual testing? | 5 | |