Showing posts with label May 2014. Show all posts
Showing posts with label May 2014. Show all posts

Saturday, August 9, 2014

DISCRETE TIME SIGNAL PROCESSING (DTSP) Semester 7 (3 Hours) May 2014

DISCRETE TIME SIGNAL PROCESSING
DISCRETE TIME SIGNAL PROCESSING (DTSP)
Semester 7
(3 Hours) May 2014
    MV-19989 
   [Total Marks : 100]
       
N.B. : (1) Question No. 1 is compulsory.  
  (2) Attempt any four questions out of remaining six questions.  
  (3) Assumptions made should be clearly stated.  
  (4) Figures to the right indicate full marks.  
       
1. (a) Obtain a digital filter transfer function H(ω) by applying Imputse invariance transformation on the analog TF.

Ha(s) = s/s2 + 3s + 2 Use fs = 1 K samples/sec.

05
  (b) Consider a filter with TF :
     H(z) = (z-1 - a) / (1 - az-1)
Identify the type of filter and justify it.
05
  (c) Find the number of complex multiplications and complex additions required to find DFT for 32 point sequence. Compare them with the number of computations required if FFT algorithm is used. 05
  (d) Consider the sequence x(n) = δ(n) + 2δ(n - 2) + δ(n -3).
Find DFT of x(n).
05
       
2. (a) A sequence is given as x(n) = {1 + 2j, 1 + 3j, 2 + 4j, 2 + 2j}
     (i) Find X(k) using DIT-FFT algorithm.
     (ii) Using the results in (i) and not otherwise find DFT of p(n) and q(n) where
             p(n) = { 1, 1, 2, 2}
             q(n) = { 2, 3, 4, 2}
06
  (b) X(K) = +36, -4 + j9.656, -4 + j 1.656, -4, -4 -j 1.656, -4 -j4, -4 -j9.656
Find x(n) using IFFT algorithm (use DIT IFFT).
10
  (c) Explain the properties of symmetricity and periodicity of phase factor. 04
       
3. (a) By means of FFT-IFFT method (DIT algo) Compute Circular convolution of
     x(n) = {2, 1, 2, 1}     h(n) = {1, 2, 3, 4}
08
  (b) An 8 point sequence x(n) = {1, 2, 3, 4, 5, 6, 7, 8}
 
(i) Find X(K) using DIF FFT algorithm
(ii) Let x1(n) = {5, 6, 7, 8, 1, 2, 3, 4} Using appropriate DFT property and answer of previous part, determine  x1(K)
(iii) Again use DFT property and find  X2(K) where  x2(n) = x(n) +  x1(n).
12
       
4. (a) Draw the Lattice filter realization for the all pole filter

     H(z) = 1/1+3/4z-1 +1/2z-2 +1/4z-3

10
  (b) Obtain DF-I, DF-II, cascade (First order sections) and parallel (First order sections) structures foe the system describe by
     y(n) = -0.1 y( n -1) +0.72 y(n - 2) + 0.7 x(n) - 0.252 x(n -1).
10
     
5. (a) Design a  FIR low pass digital filter using Hamming window for N = 7
 Hd(ejw) = e-3jω -0.75Π < ω < 0.75Π
                =0 0.75Π < | ω | < Π
10
  (b) A LPF has following specifications :-
0.8 <  | H (ω | < 1 for   0 < ω < 0.2Π
          | H(ω | < 0.2 for   0.6Π  < ω <  Π

Find filter order and analog cut off frequency if
  (i) Bilinear transformation is used for designing
  (ii) Impulse invariance is used for designing

10
       
6. (a) Explain up sampling by an integer factor with neat diagram and waveforms. 10
  (b) Explain the need of a low pass filter with a decimator and mathematically prove that ωy = ωxD. 10
       
7. Write notes on any four of the following :- 20
  (a) Frequency sampling realization of FIR filters  
  (b) Goertzel algorithm  
  (c) Set top box for digital TV reception  
  (d) Adaptive echo cancellation  
  (e) Filter banks.  

Monday, August 4, 2014

OPTICAL FIBRE COMMUNICATION (OFC) MAY 2014 ELECTRONICS AND TELECOMMUNICATION SEMESTER 8

OPTICAL FIBRE COMMUNICATION (OFC) MAY 2014 ELECTRONICS AND TELECOMMUNICATION SEMESTER 8

                                                                                                                QP Code : MV-19218
                                                        (3 Hours)                                          [Total Marks : 100]

N. B. : (1) Question No. 1 is Compulsory.
          (2) Attempt any four questions out of remaining six questions.
          (3) Assume suitable data wherever necessary and justify the same.

1. (a)Compare dark current with optical current semiconductor.5
    (b)Explain direct and Indirect band gap semiconductor.5
    (c)What do you mean by optical waveguide? How it is different from Electrical5
waveguide?
    (d)Explain Bandwidth distance product.5

2. (a)

Derive the expression for Numerical Aperture of a step -index fiber. What

5
will happen to Numerical Aperture if cladding is removed?
    (b)Compare step index and graded index fiber.5
    (c)What do you understand by intramodal dispersion? Derive the expression10
for material dispersion.

3. (a)

Explain the significance of V-number. Derive the expression for number of

10
guided modes in graded index fiber.
    (b)Explain following terms:5
        (i) Total internal angle
        (ii) Acceptance angle
       (iii) Critical angle
       (iv) Quantum efficiency
       (v) Responsivity
    (c)State the difference between LED and LASER.5

4. (a)

Explain Modified Chemical Vapour Deposition (MCVD) method of fiber

10
fabrication?
    (b)Explain with neat skeches fiber splicing techniques. Enlist the desirable10
requirements of a good connector.

5. (a)

A photodiode has a quantum efficiency of 65% when a photon of energy

10




(i) At what wavelength is the photodiode operating.
(ii) Calculate the incident optical power required to obtain photo current
    of 2.5 uA when the photodiode is operating as above.
    (b)Explain the various factors responsible for optical signal attenuation and10
dispersion.

6. (a)

With the help of reciver configuration circuit diagram, explain the working

10
of optical reciver. Also derive the expression for output.
    (b)Explain all aspects of link power budget.10

7.

Write short notes on (any four)

20
       (i) Linearly polarized modes
       (ii) OTDR
       (iii) WDM
       (iv) Compare PIN and APD diode
       (v) Optical amplitiers

Saturday, July 26, 2014

MICROPROCESSORS AND MICROCONTROLLERS - 2 (MPMC) MAY 2014 [EXTC] ELECTRONICS AND TELECOMMUNICATION SEMESTER 6

MICROPROCESSORS AND MICROCONTROLLERS - 2 (MPMC) MAY 2014 [EXTC] ELECTRONICS AND TELECOMMUNICATION SEMESTER 6

                                                                                                          QP Code : MV-18092
                                                          (3 Hours)                                    [Total Marks : 100]

Q1. is compulsory
Solve any four out of remaining

1. (a)Draw and explain read write bus cycle of 8086 in maximum mode.5
    (b)What are advantages of memory segmentation in 8086?5
    (c)Write features of PIC-18.5
    (d)Explain PIC 18 data memory organization.5

2. (a)

Draw and interface diagram of 8086 microprocessor and 8087 NDP, also explain

10
various interface signals and co-processor working with host processor.
    (b)Design a system using 8086 in minimum mode with following specifications10
     1. 8086 operating on MHz
     2. 16 KB RAM using 8 KB device with starting address of 10000.
     3. 16 KB EPROM using 8 KB device.

3. (a)

What is string adressing mode of 8086. Explain string instructions of 8086.

10
    (b)Draw and explain interfacing of 8086(maximum mode) and 8259 In single mode.10

4. (a)

Write assembly language programme for 8086 to exchange a 1 KB block of data

10
from memory location 40000 to 50000.
    (b)Explain following Instructions of PIC1810
1. ANDLW k 2. BTFSC f,b 3. SUBLW k 4. DECFSZ f,d 5. RRF f,d

5. (a)

Connect four 7-segment displays to PIC18 and write assembly language

10
programme to display '5' on LSB of display.
    (b)Write Instruction format of PIC 18 instructions.10

6. (a)

Draw and explain interfacing 0f 8086 and 8257 DMA controller.

10
    (b)Explain I/O synchronization methods of PIC18.10

7. (a)

Explain interrupt structure of 8086.

10
    (b)Explain assembler directives of 8086.10

Monday, June 30, 2014

Principles of Analog and Digital Circuits (PADC) Semester 3 (3 Hours) May 2014

Principles of Analog and Digital

Principles of Analog and Digital Circuits (PADC)
Semester 3
(3 Hours) May 2014

 

 
N.B: (1) Question no 1 is compulsory.  
  (2) Attempt any three questions from remaining questions.  
  (3) Assume suitable data wherever required.  
       
1. (a) Explain Friis transmission formula.  
  (b) What are the energy signal and power signals.  
  (c) Explain ASK system.  
  (d) Compare pcm and delta modulation.  
       
2. (a) Explain the operating principle, working of transmitter and receiver of BPSK system.  
  (b) An amplitude modulated ware form has a form.
Xc(t) = 10 (1 + 0.6 Cos2000 ∏ + 0.4 Cos400 ∏ ) Cos2000∏)
(i) Sketch the amplitude spectrum of Xe(t)
(ii) Find the power content of each spectral component including currier.
(iii) Find total power and sideband power.
(iv) What is modulation index.
 
       
3. (a) What is meant by sensitivity of a receiver and How it is improved .  
  (b) Find the mathematical expression of FM signal.  
       
4. (a) State and prove the sampling theorem for low pass and limited signal. Explain aliasing error.  
  (b) Explain the working of foster seeley discriminator with neat ckt diagram and pharos diagram.  
     
5. (a) What is meant byt sensitivity of a radio receiver and how it is imporved.  
  (b) What are the advantages of QPSK system.  
  (c) Compare analog and digital communication system.  
       
6. (a) What are advantages and dis-advantages of digital command also draw block diagram of pcm and explain it.  
  (b) Explain the following in relation of radio receiver
(i) Selectivity
(ii) Sensitive
(iii) Double spotting.
 

Friday, June 27, 2014

Information Theory and Coding (ITC) Semester 4 (3 Hours) May 2014

Information Theory and Coding

Information Theory and Coding (ITC)
Semester 4
(3 Hours) May 2014

 

NP-19886
[Total Marks : 80]
 

N.B: (1) Question no 1 is compulsory.  
  (2) Solve any three questions out of the remaining questions.  
       
1. (a) Explain the physical significance of Entropy in information theory 02
  (b) What is compression? List different Compression algorithms. 03
  (c) Describe Fermat's Little Theorem. 03
  (d) Find the generator and parity check matrices of a (7, 4) cyclic code with generator polynomial g (X) = 1 + X + X3. 03
  (e) What is Random Number Generation and when it is needed. 03
  (f) What are the security goals? Define Cryptography. 03
  (g) Write about Convolution Codes. 03
       
2. (a) Name the source coding techniques used in the following types of files and classify them ad lossy or lossless.
(i) .zip  (ii) .jpg  (iii) .mpg  (iv) .bmp  (v) .gif
10
  (b) Define generator and parity check matrices of a (7, 4) linear block code. Explain how to generate a linear block code using G-matrix. Explain with example. 10
       
3. (a) Describe about Discrete probability and logarithms. 10
  (b) Given Xi = {X1, X2, X3, X4, X5, X6} with probability as below:
     p(Xi) = {0.3, 0.25, 0.2, 0.12, 0.08, 0.05}.
Make Huffman code. Find efficiency of this code.
10
       
4. (a) What do you mean by Symmetric key cryptography? Explain DES in detail. 10
  (b) A (7, 4) cyclic code has a generator polynomial: g(X) = X3 + X + 1.
     (i) Draw the block diagram of encoder and syndrome calculator.
     (ii) Find generator and parity check matrices in systematic form.
10
     
5. (a) Describe with example Modular Arithmetic, Exponentiation and Congruencies. 10
  (b) Explain Diffie-Hellman Algorithm. Which attack, is it vulnerable to? 10
       
6. Write short notes on :- 20
  (a) Types of Entropy  
  (b) Digital Signature  
  (c) RLF  
  (d) Prime Number Generation  

Thursday, June 26, 2014

Web Programming (WP) Semester 4 (3 Hours) May 2014

Web Programming

Web Programming (WP)
Semester 4
(3 Hours) May 2014

 

NP-19851
[Total Marks : 80]
 

N.B: (1) Question no 1 is compulsory.  
  (2) Write any three questions out of remaining.  
  (3) Assume suitable data if required.  
       
1. (a) Differentiate between GET and POST 05
  (b) Explain issues in web designing. 05
  (c) Explain PHP string functions. 05
  (d) Explain XMD DTD. 05
       
2. (a) Write Javascript program to change background colour continuously. 10
  (b) What is CSS? Explain the ways by which CSS is included in HTML. 10
       
3. (a) Explain page life cycle of JSP application. 10
  (b) Write an  ASP.NET program to insert a new record in database. 10
       
4. (a) What is XML and XSLT? Explain which an example. 05
  (b) Write a HTML code to illustrate use of table and lists 05
  (c) What is session tracking? What are the ways to do session tracking? how session tracking is done in PHP. 10
     
5. (a) Write a JSP program to display todays date. 05
  (b) Explain JavaScript objects Window and Document. 10
  (c) What is JQUERY ? Illustrate the use of JQUERY with a program. 05
       
6. (a) List various events on various HTML elements and explain Event handling in JavaScript with example. 10
  (b) Explain ADO.NET with example. 10