Showing posts with label EXTC. Show all posts
Showing posts with label EXTC. Show all posts

Monday, July 28, 2014

MICROPROCESSORS AND MICROCONTROLLERS - 2 (MPMC) DECEMBER 2013 [EXTC] ELECTRONICS AND TELECOMMUNICATION SEMESTER 6

MICROPROCESSORS AND MICROCONTROLLERS - 2 (MPMC) DECEMBER 2013 [EXTC] ELECTRONICS AND TELECOMMUNICATION SEMESTER 6

Con. 7339-13.                                                                                                   LJ - 11488
                                                           (3 Hours)                                        [Total Marks : 100]

N. B. : (1) Question No. 1 is Compulsory.
           (2) Solve any four questions from remaining questions.

1. (a)Design memory system for 8086 microprocessor with following specifications :-12
   (i) 8086 microprocessor working in mininimum mode at 10MHz frequency.
  (ii) 32 KB EPROM using 8 KB Chips
  (iii) 16 KB SRAM using 4 KB Chips.
Explain the design and show memory address map.
    (b)Draw and explain typical I/O port pin structure of PIC 18.4
    (c)Describe Mode Set Register of DMA controller 8257.4

2. (a)

Explain control word and status word of 8087 NDP.

10
    (b)Describe addressing modes of PIC 18.10

3. (a)

Interface Seven segment dispaly with PIC 18 and explain its working.

8
    (b)Draw and explain timing diagrams for read operation in minimum and maximum12
mode of 8086 microprocessor.

4. (a)

Explain memory organisation of PIC 18.

10
    (b)With neat diagram explain interfacing of DMA controller 8257 wiith 808610
microprocessor in minimum mode.

5. (a)

Write an assembly language program for 8086 microprocessor to check whether.

10
a string of 10 characters represents Palindrome.
    (b)Interface 8087 NDP with 8086 microprocessor and expalin their interaction.10

6. (a)

Which are the different methods of program looping?Explain each method in short.

10
    (b)Describe how interface chip and I/O Devices are synchronised. Explain it using10
pulse mode.

7.

Write notes on (any four):-

20
      (a) Status register of PIC 18
      (b) Control flags of 8086
      (c) Assembler directives
      (d) Programming model of 8086
      (e) Advantages of memory segmentation.

Saturday, July 26, 2014

MICROPROCESSORS AND MICROCONTROLLERS - 2 (MPMC) MAY 2014 [EXTC] ELECTRONICS AND TELECOMMUNICATION SEMESTER 6

MICROPROCESSORS AND MICROCONTROLLERS - 2 (MPMC) MAY 2014 [EXTC] ELECTRONICS AND TELECOMMUNICATION SEMESTER 6

                                                                                                          QP Code : MV-18092
                                                          (3 Hours)                                    [Total Marks : 100]

Q1. is compulsory
Solve any four out of remaining

1. (a)Draw and explain read write bus cycle of 8086 in maximum mode.5
    (b)What are advantages of memory segmentation in 8086?5
    (c)Write features of PIC-18.5
    (d)Explain PIC 18 data memory organization.5

2. (a)

Draw and interface diagram of 8086 microprocessor and 8087 NDP, also explain

10
various interface signals and co-processor working with host processor.
    (b)Design a system using 8086 in minimum mode with following specifications10
     1. 8086 operating on MHz
     2. 16 KB RAM using 8 KB device with starting address of 10000.
     3. 16 KB EPROM using 8 KB device.

3. (a)

What is string adressing mode of 8086. Explain string instructions of 8086.

10
    (b)Draw and explain interfacing of 8086(maximum mode) and 8259 In single mode.10

4. (a)

Write assembly language programme for 8086 to exchange a 1 KB block of data

10
from memory location 40000 to 50000.
    (b)Explain following Instructions of PIC1810
1. ANDLW k 2. BTFSC f,b 3. SUBLW k 4. DECFSZ f,d 5. RRF f,d

5. (a)

Connect four 7-segment displays to PIC18 and write assembly language

10
programme to display '5' on LSB of display.
    (b)Write Instruction format of PIC 18 instructions.10

6. (a)

Draw and explain interfacing 0f 8086 and 8257 DMA controller.

10
    (b)Explain I/O synchronization methods of PIC18.10

7. (a)

Explain interrupt structure of 8086.

10
    (b)Explain assembler directives of 8086.10

Friday, July 25, 2014

MICROPROCESSORS AND MICROCONTROLLERS - 2 (MPMC) DECEMBER 2011 [EXTC] ELECTRONICS AND TELECOMMUNICATION SEMESTER 6

MICROPROCESSORS AND MICROCONTROLLERS - 2 (MPMC) DECEMBER 2011 [EXTC] ELECTRONICS AND TELECOMMUNICATION SEMESTER 6

1. (a)Design 8086 Microprocessor based system with following specifications :-12
       (i) 8086 Working at 6MHz
       (ii) 16 KB EPROM using 8 KB Chips
      (iii) 16 KB SRAM using 8 KB Chips.
    (b)Draw the memory organisation of PIC 18 controller and explain.8

2. (a)

Draw interface diagram of 8086 with 8087 and expalin various interface signals

10
and working.
    (b)Convert the decimal number 125.125 into short real, long real format of 8087.10

3. (a)

Explain the interrupt structure of 8086 Microprocessor with respect to 8259 PIC.

10
    (b)Draw the PSW of 8086 and explain setting of different bits with example.10

4. (a)

Draw and explain interfacing of 8086 with 8255.

10
    (b)Write 8086 based program to transfer n bytes of data from source memory area10
to the destination memory area.

5. (a)

With neat diagram explain the different instruction formats of PIC 18 controller.

10
Also give the comparison of bit size of OPcode for different instructions.
    (b)Draw the flow chart and write assembly language program for PIC 18 controller10
to read and write ten bytes from program memory to data memory.

6. (a)

Explain the addressing modes of PIC 18 controller with suitable example.

10
    (b)Discuss the pipeline concept used in PIC 18.10

7.

Write sort notes on any two of the following :-

20
     (a) Stack related instructions of PIC 18.
     (b) Dual functionality of parallel ports of PIC 18
     (c) String instructions in 8086.

MICROPROCESSORS AND MICROCONTROLLERS - 2(MPMC) DECEMBER 2010 [EXTC] ELECTRONICS AND TELECOMMUNICATION SEMESTER 6

MICROPROCESSORS AND MICROCONTROLLERS - 2(MPMC) DECEMBER 2010 [EXTC] ELECTRONICS AND TELECOMMUNICATION SEMESTER 6

Con.6416-10.                                        (REVISED COURSE)                          GT-7548

                                                                       (3 Hours)                            [Total Marks :-100]

N.B:- (1)Question No.1 is compulsory.
          (2) Solve any four from remaining six questions. 

1. (a) Design 8086 based microcomputer system using minimum mode with following
         specification [12 Marks]              

  • CPU working at 5Mhz
  • 32 KB SRAM(16K X 8 Device)
  • 32 KB EPROM (8 K X 8 Device)

    Clearly show address decoding with appropriate address map using exhaustive decoding.
    Draw a neat schematic.
    (b) Explain in brief the memory organization of PIC18microcontroller and also explain the purpose            of processor stack. [8 Marks] 
2. (a) Write a program for PIC18F to read 8 bit data on port B, swap the nibbles and output the 
          result on port D. [10 Marks] 
     (b) Explain how an interrupt is processed and interrupt service routine is executed in 
          PIC18F. [10 Marks]  

3. (a) Write a program for performing 32 bit X 32 bit multiplication using 8086. Assume the operands 
          and result are stored in memory. [10 Marks]
    (b) Explain following instructions in PIC18F:- [10 Marks]
          i) MOVLW    ii) BCF    iii) ADDWF    iv) RLF    v) COMF 

4. (a) Give two examples of each types of addressing mode in 8086. [8 Marks]
          (i) Direct addressing   (ii) Based Addressing
         (iii) Based in indexed addressing   (iv) Implicit addressing
     (b) Explain any two operations of Timer in PCF18F and write a program to calculate delay 
          of 100 microsecond (frequency 40 MHz). [12 Marks]

5. (a) Write a program to divide the unsigned 16-bit number OFOF h stored in data register REG1 
          and REG2 (MSB in REG2) by 8. [10 Marks] 
    (b) Draw interface of 8086-8087 and explain its working with the help of queue status, request/grant 
          and busy/test interface. [10 Marks]

6. (a) Explain different modes of operations of DMA Controller. [10 Marks]
    (b) Write an assembly language program using 8086 instructions for an up counter, which counts 
          from 00 to 7F (hexadecimal). It start on occurrence of an interrupt and counts up by ten digits 
          every time the interrupt arrives. [10 Marks]  
 
7. (a) What is segmented memory and what are its advantages? Explain logical and physical address 
          in 8086. What are default segment assignments and what is segment override? Explain with 
          suitable examples. [10 Marks]  
    (b) Explain flag register of 8086. Show with suitable examples how direction flag is useful in 
         string instructions. [10 Marks]